Design an Integral Sliding Mode Controller for a Nonlinear System
DOI:
https://doi.org/10.22153/kej.2017.09.003Keywords:
Chattering phenomenon, Classical sliding mode controller, Integral sliding mode controller, Switching surfaceAbstract
The goal of this paper is to design a robust controller for controlling a pendulum
system. The control of nonlinear systems is a common problem that is facing the researchers in control systems design. The Sliding Mode Controller (SMC) is the best solution for controlling a nonlinear system. The classical SMC consists from two phases. The first phase is the reaching phase and the second is the sliding phase. The SMC suffers from the chattering phenomenon which is considered as a severe problem and undesirable property. It is a zigzag motion along the switching surface. In this paper, the chattering is reduced by using a saturation function instead of sign function. In spite of SMC is a good method for controlling a nonlinear system but it still suffers from long settling time which is considered as undesired property. The Integral Sliding Mode controller (ISMC) can be used to reduce the settling time. Also, the ISMC is a good method for controlling a nonlinear systems. ISMC is simple, has a high performance and can be considered as an effective and powerful technique. In ISMC method, the reaching phaseis eliminated which considered a main part in designing classical SMC. The important property of the ISMC as well as the Classical Sliding Mode Controller (CSMC),is the ability to make the systems asymptotically stable. The pendulum system was used for testing the CSMC and ISMC. The results obtained from the simulation showed the advantages of using the ISMC when comparied with the CSMC. Finally, MATLAB software package was adopted in this paper.
Downloads
Downloads
Published
Issue
Section
License
Copyright: Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
