Impact Energy of 100Cr6 under low different velocities
Abstract
This study has been undertaken to postulate the mechanism of impact test at low velocities. Thin-walled tubes of 100Cr6 were deformed under axial compression. In the present work there are seven velocities (4.429,4.652,5.240,5.600,5.942,6.264, 6.569) m\sec were applied to show how they effect the load, change in length, also the kinetic energy. However, the comparison between the obtained results and the other studies (Alexandar[3] , Abramowicz[4], Ayad[5]) was made the present work and Ayad data show good agreement. Load, change in length, kinetic energy were determined to understand the impact test.
Downloads
References
[2] Karagiozovaa, D. and Norman J.C. “Inertia effects in axis-symmetrically deformed cylindrical shells under axial impact” Internal report, Liverpool University, UK. 2000
[3] Alexander, J. M. “An approximate analysis of the collaps of thin cylindrical shells under axial loading” Q. J. Mech. Appl. Math 1960 pp (1-10).
[4] Abramowicz W. and Jones, N. “Dynamic axial crushing of circular tubes” Int. J. Impact 1984, Page 263.
[5]Ayad Arab, K. “Variety speed impact of thin walled circular tubes” MSC Thesis, university of AL-Anbar (2005).
[6] Guillow, S.R. and Grzebieta, R. H. “Quasi-static” axial compression of thin-walled circular aluminum tubes” I. J. Mech. Sci. Vol. 43, 2001 pp.2103-2123.
[7] Huang, X. and Lu, G. “Axisymmetric progressive crushing of circular tubes” I.J. crashworthiness Vol.8. 2002 pp-87-95
[8] Seitzberger, M. and Willminger, S. “Application of plastic collapse mechanisms for the axial crushing analysis of tubular steel structures filled with aluminum foam” Int. J. crashworthiness, 2001 pp (165-176).
[9] Jones, N. and Abramowicz, W. (1985) “Static and dynamic axial curshing of circular and square tubes” Proc. Metal forming and Impact Mech. Pergoman Press oxford 1985.
[10] Al-Badrany, Ayad Aied “Energy absorption capacity of thin metallic tubes” MSC. Thesis, Al-Anbar University 2005.
Downloads
Published
Issue
Section
License
Copyright: Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
