Iraqi Bauxite and Porcalinite Rocks Based Refractory, Preparation and Studying Properties
DOI:
https://doi.org/10.22153/kej.2017.01.004Keywords:
Bauxite, Refractory brick, Porcelanite Stone, Physical properties, Thermal properties.Abstract
Abstract
Locally natural occurring Iraqi rocks of Bauxite and Porcelanite (after pre calcinations at 1000oC for 1hr) were used, with the addition of different proportions of MgO and Al2O3, to prepare refractory materials. The effects of these additives on the physical and thermal properties of the prepared refractories were investigated.
Many batches of Bauxite/MgO, Bauxite/Al2O3, Bauxite/MgO/Al2O3, and Porcelanite/ MgO/Al2O3 were prepared. The mixture is milled and classified into different size fractions; fine (less than 45μm) 40%, middle (45-75μm) 40%, and coarse (75-106μm) 20% .
X-ray diffraction technique was used to identify the structure of Bauxite and Porcelanite rocks. The samples were formed by semi dry pressing with the addition of few drops of water as a binder. These samples were sintered at 1100oC for 2hrs. Physical properties (linear shrinkage, density and porosity), and the thermal properties (thermal conductivity, diffusivity and specific heat) were measured for all the prepared samples.
The results show the increasing of density is susceptible to the thermal properties, and also the addition of Al2O3 and MgO to the natural rocks have a limited effect, and the values of the parameters above for the natural rocks, were in the levels to be used as a refractory material for lining a metal fusion furnaces and other applications.
Keywords: Bauxite, Refractory brick, Porcelanite Stone, Physical properties, Thermal properties.
Downloads
Downloads
Published
Issue
Section
License
Copyright: Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
