The Effects of Vortex Generator Types on Heat Transfer and Flow Structure in a Rectangular Duct Flows
Abstract
In this numerical study a detailed evaluation of the heat transfer characteristics and flow structure in a laminar and turbulent flow through a rectangular channel containing built-in of different type vortex generator has been a accomplished in a range of Reynolds number between 500 and 100,000.A modified version of ESCEAT code has been used to solve Navier-Stokes and energy equations. The purpose of this paper is to present numerical comparisons in terms of temperature, Nusselt number and flow patterns on several configurations of longitudinal vortex generator including new five cases. The structures of heat and flow were studied, using iso-contours of velocity components, vortices, temperature and Nusselt number. This study shows that the predicted structures of fluid flow, temperature fields and Nusselt number variation are strongly affected by the presence of the turbulators. Staggered arrangement gains high Nusselt number, also the lower and upper arrangements have higher Nusselt number than plane duct. High Reynolds number (higher air inlet velocity) will enhance the Nusselt number. Increase in ribs height will enhance the heat transfer as it works as surface area and turbulator at the same time.
Downloads
References
2- Alvaro Valencia “ Turbulent Flow And Heat Transfer In A Channel With A Square Bar Detached From The Wall “, Numerical Heat Transfer Part A, 37, 2000, PP. 289-306.
3- Jamil A. Khan, Jason Hinton, and Sarah C.Boxter, “Enhancement Of Heat Transfer With Inclined Baffles And Ribs Combined “, Journal of Enhanced Heat Transfer, 9, 2002, PP.137-151.
4- Suh-Jeng Yang. “A Numerical Investigation Of Eeat Transfer Enhancement For Electronic Devices Using An Oscillating Vortex Generator “, Numerical Heat Transfer, Part A , 42 ,2002 , PP.26-284.
5- St. Tiggelbeck, N.K.mitra, and M.Fiebig “Comparison Of Wing Type Vertex Generators For Heat Transfer Enhancement In Channel Flows” Transaction of the ASME, Journal of Heat Transfer, November 1994,Vol.116.
6- İsak KOTCİO Ğlu , Troman AYHAN , Hayati OLGUN , and Betűl AYHAN “ HEAT Transfer And Flow Structure In A Rectangular Channel With Wing-Type Vortex Generator “, Tr.J. of Engineering and Environmental Science ,22 (1998) ,PP. 185-195.
7- T.M.liou , C.-C. Chen , and T.W.Tsai “HEAT Transfer And Fluid Flow In A Square Duct With 12 Different Shaped Vortex Gene Rotors”, Transaction of the ASME ,Journal of Heat Transfer ,may 2000,Vol.122,PP.327-335 .
8- Ahmed Sohankar and Lars Davidson, “Numerical Study Of Heat And Flow In A Plate-Fin Heat Exchanger With Vortex Generators”, Turbulence, Heat and mass transfer 4, 2003,Begell, Inc., PP.1155-1162.
9- Y.H .Hung and H.H.Lin , An effective installation of turbulence promoters for heat transfer augmentation in a Vertical rib-heated channel ,”int. J. Heat Mass transfer ,vol.35,no.1,PP.29-42,1992.
10- J.C. HAN and Y.M.ZHANG.”High Performance Heat Transfer Ducts With Parallel Broken And V-Shaped Broken Ribs” Int. J. Heat mass transfer Vpl.35.No.2, PP.513-253, 1992.
11- D.A.Aliaga D. E.klein ,and J.P.Lamb ,” Heat Transfer Measurements On A Ribbed Surface At Constant Heat Flux Using Infrared Thermongraphy “, Experimental Heat Transfer ,Vol.6,PP.17-34,1993 .
12- R.W.DAVIS and E.F.MOORE, “A Numerical Study Of Vortex Shedding From Rectangles ”, J, Fluid mech .(1982),vol.116,PP.475-506.
13- P.A. Eibeck and J.K. Eaton ,” Heat Transfer Effects Of A Longitudinal Vortex Embedded In A Turbulent Boundary Layer”, Transactions of the ASME , Journal of Heat Transfer , February 1987 ,vol.109 ,PP16-24 .
14-Hayder Mahdi Kadhum,”Numerical And Experimental Study Of Enhancement Of Heat Transfer In Roughened Ribbed Duct”, January 2004, Ph.D. Thesis, Dept. of Technical Education, University of Technology.
15- Waheed. S. Mohammed,” Space Air-Conditioning Of Mechanically Ventilated Rooms: Computation Of Flow And Heat Transfer ”, June 1986,Ph.D.Thesis, school of mechanical Engineering, Cranfield Institute of Technology.
16- Patanker S.V.’Numerical Heat Transfer And Fluid Flow ”, Me Graw-Hill Book Company New York, 1980.
17- Sabah Tarik Ahmed,”Numerical And Experimental Study On Heat Transfer Enhancement By Vortex Generator ”, September 2001, Ph.D. Thesis, Dept. of mechanical Engineering, university of Technology.
Downloads
Published
Issue
Section
License
Copyright: Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
