Feature - Based Approach to Automatic Fixturing System Planning For Uniform Polyhedra Workpiece
Abstract
This paper demonstrates the design of an algorithm to represent the design stages of fixturing system that serve in increasing the flexibility and automation of fixturing system planning for uniform polyhedral part. This system requires building a manufacturing feature recognition algorithm to present or describe inputs such as (configuration of workpiece) and built database system to represents (production plan and fixturing system exiting) to this algorithm. Also knowledge – base system was building or developed to find the best fixturing analysis (workpiece setup, constraints of workpiece and arrangement the contact on this workpiece) to workpiece.
Downloads
References
[2] S. Ratchev, K. Phuah , G. L¨ammel, W. Huang; “An experimental investigation of fixture–workpiece contact behaviour for the dynamic simulation of complex fixture–workpiece systems”; Journal of Materials Processing Technology; V.164–165;P. 1597–1606 ; 2005.
[3] W. Hu and Y. Rong; “A fast interference checking algorithm for automated fixture design verification”; Int J Adv Manuf Technol; V. 16; P. 571–581; 2000.
[4] Shu Huang Sun and Jahau Lewis Chen; “A fixture design system using Case-based reasoning”; Engng Applic. Artif Intell. Vol. 9, No. 5, pp. 533-540, 1996.
[5] Necmettin Kaya; “Machining fixture locating and clamping position optimization using genetic algorithms”; Computers in Industry Vol.57; P. 112–120; 2006.
[6] Liviu Segal, Camelia Romanescu and Nicolae Gojinetchi; “Methodologies for automated design of modular fixtures”; BULETINUL INSTITUTULUI POLITEHNIC DIN IASI Publicate de Universitatea Technica"Gh.Asachi", Iasi Tomul XLVII(LI), Supliment, 2001.
[7] Y. Wang, et.al.; “A functional approach for the formalization of the fixture design process”; International Journal of Machine Tools & Manufacture; Vol.46; P. 683–697; 2006.
[8] Shane P. Siebenaler and Shreyes N. Melkote* ; “Prediction of workpiece deformation in a fixture system using the finite element method”; International Journal of Machine Tools & Manufacture; Vol.46; P. 51–58; 2006.
[9] Nashua, N. and Vikhroli, P. "Feature Recognition Technology" Internet, www.gosoft.com. 2000.
[10] Tseng, Y. J. “A modular Modeling Approach by Integration Feature Recognition and Feature-Based design” Computer in industry, Vol. 30, PP. 113-125, 1999.
[11] Regli, W. C., Pratt, M and Han, J. H. "Features Recognition for Process Planning" Manufacturing Engineering Laboratory, the National Institute of Standards and Technology, United States Department of Commerce, 2000.
Downloads
Published
Issue
Section
License
Copyright: Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
