Free Convection in an Inclined Concentric Annular Square Cavities Filled With Porous Medium and Heated By Non-Uniform Temperature
pdf

How to Cite

Free Convection in an Inclined Concentric Annular Square Cavities Filled With Porous Medium and Heated By Non-Uniform Temperature. (2010). Al-Khwarizmi Engineering Journal, 6(3), 45-60. https://alkej.uobaghdad.edu.iq/index.php/alkej/article/view/502

Publication Dates

Abstract

A numerical study of the two-dimensional steady free convection flow in an inclined annulus between two concentric square cavities filled with a porous medium is presented in this paper for the case when the side outer walls are kept with differentially heated temperature while the horizontal outer walls and the inner walls are insulated. The heated wall is assumed to have spatial sinusoidal temperature variation about a constant mean value. The Darcy model is used and the fluid is assumed to be a standard Boussinesq fluid. For the Cartesian coordinate system, the governing equations which were used in stream function form are discretized by using the finite difference method with successive under – relaxation method (SUR) and are solved by Gauss-Siedel iterative method. The upwind scheme was used for the transport terms in the energy conservation equation. The results are presented to demonstrate the streamlines, the isotherms, and the Nusselt number depending on the Rayleigh number ranging from (Ra =10 to 1000), dimension ratio from (Dr = 0.15 to 0.45), and the inclination angle from (= 0o to 45o). Also the effects of the amplitude (=0 to 1) and the wave number (f =0 to 5) of the heated side wall temperature variation on the free convection are investigated. The results show the effect of previous parameters (Ra, Dr,, , and f) on the flow fields and temperature profiles. It also show that the average Nusselt number is a strong function of the Rayleigh number, inclination angle, dimension ratio, and temperature variation. The peak value of the average Nusselt number based on the hot wall temperature is observed to occur at dimension ratio of (0.15), inclination angle of (40.1°), amplitude and wave  number (1 & 0.75) for Rayleigh number of (1000).

pdf

References

[1] Nield, D. and Bejan, A., "Convection in Porous Media", 2nd edition, Springer, New York, Ny, (1999).
[2] P. Cheng, "Heat Transfer in Geothermal Systems", Adv. Heat Transfer 4 (1978), 1–105.
[3] P.H. Oosthuizen, and H. Patrick, "Natural Convection in an Inclined Square Enclosure Partly Filled with a Porous Medium and with a Partially Heated Wall", HTD 302, American Society of Mechanical Engineers, Heat Transfer Division, (Publication), (1995), 29–42.
[4] P. Nithiarasu, K.N. Seetharamu, and T. Sundararajan, "Numerical Investigation of Buoyancy Driven Flow in a Fluid Saturated non-Darcian Porous Medium", Int. J. Heat Mass Transfer 42 (7) (1998), 1205–1215.
[5] A.M., Al-Amiri, "Analysis of Momentum and Energy Transfer in a Lid Driven Cavity Filled with a Porous Medium", Int. J. Heat Mass Transfer 43 (2000), 3513–3527.
[6] Nawaf H. Saeid, "Natural Convection in a Square Porous Cavity with an Oscillating Wall Temperature", The Arabian Journal for Science and Engineering, Vol. 31, NO. 1B (2005), 35 – 46.
[7] J.P. Caltagirone, and S. Bories, "Solutions and Stability Criteria of Natural Convective Flow in an Inclined Porous Layer", J. Fluid Mech. 155 (6) (1985), 267–287.
[8] P. Vasseur, M.G. Satish, and L. Robillard, "Natural Convection in a Thin Inclined Porous Layer Exposed to a Constant Heat Flux", Int. J. Heat Mass Transfer 30 (3) (1987), 537–549.
[9] M. Sen, P. Vasseur, and L. Robillard, "Multiple Steady States for Unicellular Natural Convection in an Inclined Porous Layer", Int. J. Heat Mass Transfer 30 (10) (1987), 2097–2113.
[10] A.C. Baytas, "Entropy Generation for Natural Convection in an Inclined Porous Cavity", Int. J. Heat Mass Transfer 43 (12) (2000), 2089–2099.
[11] Saeid, N. H. and Mohamed, A., "Periodic Free Convection From a Vertical Plate in a Saturated Porous Medium, non- Equilibrium Model", International Journal of Heat and Mass Transfer, Vol.48. (2006), 3855 - 3863.
[12] Yoo, J.S., "Thermal Convection in a Vertical Porous Slot with Spatially Periodic Boundary Temperature", International Journal of heat and mass transfer, Vol. 46, issue 2, (2003), 381-384.
[13] Robert W., "Numerical Marching Techniques for Fluid Flow with Heat Transfer", Lewis Research Center Cleveland, Ohio and Carnegie – Mellon University Pittsburgh, Pennsylvania.
[14] Najdat N. A., ''Laminar Flow Separation in Constructed Channel'', Ph.D. Thesis, Michigan State University, 1987.
[15] John D. Anderson, "Computational Fluid Dynamics', International Editions 1995 By McGraw – Hill.
[16] Chan, B. K., Ivey, C. M., and Barry, J. M., "Natural Convection in Enclosed Porous Medium with Rectangular Boundaries", Journal of heat transfer, vol.2, (1970), 21-27.
[17] Burns, P. J., Chow, L. C., and Tien, C. L., "Convection in Vertical Slot filled with Porous Insulation", Int. Journal of heat mass transfer, vol.20, (1974), 919-926.
[18] Bejan, A., and Tien, C., "Natural Convection in a Horizontal Porous Medium Subjected to an End-to-End Temperature Difference'', Journal of heat transfer, vol.100, (1978), 191-198.

Copyright: Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.