Factors Affecting Electrocoagulation Process for Different Water Types: A review

Authors

  • Shahad Fadhil Abed AL-Rubaye Department of Chemical Engineering /Colleg of Ingineering/ Alnahrain University/ Iraq https://orcid.org/0000-0002-5738-8582
  • Naseer A. AlHaboubi Department of Chemical Engineering /Colleg of Ingineering/ Alnahrain University/ Iraq https://orcid.org/0000-0002-8055-3638
  • Aiman H. Al-Allaq Old Dominion University (ODU)/ USA

DOI:

https://doi.org/10.22153/kej.2024.10.001

Abstract

Raw water must meet specific physical, chemical, and biological requirements to be suitable for drinking. There are various techniques available for treating wastewater, and aside from conventional methods that involve chemicals, electrocoagulation is an efficient and advanced approach. Electrocoagulation has proven effective in treating many pollutants, including bacteria, viruses, iron, fluoride, sulfate, boron, hardness, and turbidity. Total suspended solids, organic and inorganic materials, chemical oxygen demand COD, biochemical oxygen demand BOD, and color. It finds extensive application in treating different types of water and wastewater due to its exceptional ability to remove diverse contaminants. Recently, electrocoagulation has garnered significant attention due to its remarkable efficiency in treating various pollutants. This article provides a thorough analysis of contemporary literature that is committed to using electrocoagulation in a variety of water treatment methods, with a focus on the different variables affecting the process performance, such as electrical current, electrode type, electrode configuration, initial pH, electrode distance, NaCl concentration, initial concentration of pollutants, operating temperature and electrolysis time.

 

Downloads

Download data is not yet available.

References

C. Sarala, “Domestic Wastewater Treatment by Electrocoagulation with Fe-Fe Electrodes,” International Journal of Engineering Trends and Technology, 2012.

E. A. Vik, D. A. Carlson, A. S. Eikum I, E. T. Gjessing, and --Nalle Scandinavian Exchange Program, “ELECTROCOAGULATION OF POTABLE WATER,” 1984.

K. Pooja and V. D. Salkar, “Review of Studies on Hardness Removal by Electrocoagulation.” [Online]. Available: http://www.irphouse.com

A. Saiba, S. Kourdali, B. Ghernaout, and D. Ghernaout, “In desalination, from 1987 to 2009, the birth of a new seawater pretreatment process: Electrocoagulation-an overview,” Desalination and Water Treatment, vol. 16, no. 1–3. Taylor and Francis Inc., pp. 201–217, 2010. doi: 10.5004/dwt.2010.1094.

N. S. Kumar and S. Goel, “Factors influencing arsenic and nitrate removal from drinking water in a continuous flow electrocoagulation (EC) process,” J Hazard Mater, vol. 173, no. 1–3, pp. 528–533, Jan. 2010, doi: 10.1016/j.jhazmat.2009.08.117.

S. M. Adapureddy and S. Goel, “Optimizing Electrocoagulation of Drinking Water for Turbidity Removal in a Batch Reactor.”

J. Lin, G. J. Millar, S. J. Couperthwaite, and I. D. R. Mackinnon, “ELECTROCOAGULATION AS A PRE-TREATMENT STAGE TO REVERSE OSMOSIS UNITS.”

S. Vasudevan, J. Lakshmi, and G. Sozhan, “Optimization of the process parameters for the removal of phosphate from drinking water by electrocoagulation,” Desalination Water Treat, vol. 12, no. 1–3, pp. 407–414, 2009, doi: 10.5004/dwt.2009.971.

M. G. Harinarayanan Nampoothiri, A. M. Manilal, and P. A. Soloman, “Control of Electrocoagulation Batch Reactor for Oil removal from Automobile Garage Wastewater,” Procedia Technology, vol. 24, pp. 603–610, 2016, doi: 10.1016/j.protcy.2016.05.136.

M. Malakootian, H. J. Mansoorian, and M. Moosazadeh, “Performance evaluation of electrocoagulation process using iron-rod electrodes for removing hardness from drinking water,” Desalination, vol. 255, no. 1–3, pp. 67–71, May 2010, doi: 10.1016/j.desal.2010.01.015.

K. Resan Kalash, I. NGhazi, and M. A. Abdul-Majeed, “Hardness Removal from Drinking Water Using Electrochemical Cell,” 2015.

S. Vasudevan, J. Lakshmi, and G. Sozhan, “Studies on the removal of iron from drinking water by electrocoagulation - A clean process,” Clean (Weinh), vol. 37, no. 1, pp. 45–51, 2009, doi: 10.1002/clen.200800175.

Z. Gu, Z. Liao, M. Schulz, J. R. Davis, J. C. Baygents, and J. Farrell, “Estimating dosing rates and energy consumption for electrocoagulation using Iron and aluminum electrodes,” Ind Eng Chem Res, vol. 48, no. 6, pp. 3112–3117, Mar. 2009, doi: 10.1021/ie801086c.

H. Posavčić, I. Halkijević, and Ž. Vuković, “Posavčić et al. Application of electrocoagulation for water conditioning APPLICATION OF ELECTROCOAGULATION FOR WATER CONDITIONING.” [Online]. Available: https://www.crs-reprocessing.com/en/crs-solutions/electrocoagulation/,

M. Alimohammadi et al., “Elimination of natural organic matter by electrocoagulation using bipolar and monopolar arrangements of iron and aluminum electrodes,” International Journal of Environmental Science and Technology, vol. 14, no. 10, pp. 2125–2134, Oct. 2017, doi: 10.1007/s13762-017-1402-3.

D. Ghosh, C. R. Medhi, and M. K. Purkait, “Treatment of fluoride containing drinking water by electrocoagulation using monopolar and bipolar electrode connections,” Chemosphere, vol. 73, no. 9, pp. 1393–1400, Nov. 2008, doi: 10.1016/j.chemosphere.2008.08.041.

2010r K Purkait, “Treatment of drinking water containing iron using Electrocoagulation,” 2010.

I. Kabdaşlı, I. Arslan-Alaton, T. Ölmez-Hancı, and O. Tünay, “Electrocoagulation applications for industrial wastewaters: a critical review,” Environmental Technology Reviews, vol. 1, no. 1, pp. 2–45, Nov. 2012, doi: 10.1080/21622515.2012.715390.

P. K. Holt, G. W. Barton, and C. A. Mitchell, “Deciphering the science behind electrocoagulation to remove suspended clay particles from water,” 2004.

M. Kobya, A. Akyol, E. Demirbas, and M. S. Oncel, “Removal of arsenic from drinking water by batch and continuous electrocoagulation processes using hybrid Al-Fe plate electrodes,” Environ Prog Sustain Energy, vol. 33, no. 1, pp. 131–140, Apr. 2014, doi: 10.1002/ep.11765.

B. al Aji, Y. Yavuz, and A. S. Koparal, “Electrocoagulation of heavy metals containing model wastewater using monopolar iron electrodes,” Sep Purif Technol, vol. 86, pp. 248–254, Feb. 2012, doi: 10.1016/j.seppur.2011.11.011.

C. Zhang, S. Tan, X. Niu, and P. Su, “Treatment of geothermal water with high fluoride content by electrocoagulation,” Desalination Water Treat, vol. 54, no. 8, pp. 2223–2227, May 2015, doi: 10.1080/19443994.2014.900727.

2010r K Purkait, “Treatment of drinking water containing iron using Electrocoagulation,” 2010.

G. Chen, “Electrochemical technologies in wastewater treatment,” Sep Purif Technol, vol. 38, no. 1, pp. 11–41, Jul. 2004, doi: 10.1016/j.seppur.2003.10.006.

I. Kabdaşlı, I. Arslan-Alaton, T. Ölmez-Hancı, and O. Tünay, “Electrocoagulation applications for industrial wastewaters: a critical review,” Environmental Technology Reviews, vol. 1, no. 1, pp. 2–45, Nov. 2012, doi: 10.1080/21622515.2012.715390.

I. Kabdaşlı, I. Arslan-Alaton, T. Ölmez-Hancı, and O. Tünay, “Electrocoagulation applications for industrial wastewaters: a critical review,” Environmental Technology Reviews, vol. 1, no. 1, pp. 2–45, Nov. 2012, doi: 10.1080/21622515.2012.715390.

N. Mameri, A. R. Yeddou, H. Lounici, D. Belhocine, H. Grib, and B. Bariou, “DEFLUORIDATION OF SEPTENTRIONAL SAHARA WATER OF NORTH AFRICA BY ELECTROCOAGULATION PROCESS USING BIPOLAR ALUMINIUM ELECTRODES.”

K. R. Kalash, I. NGhazi, and M. A. Abdul-Majeed, “Hardness Removal from Drinking Water Using Electrochemical Cell,” Eng. &Tech.Journal, vol. 33, no. 1. 2015.

N. Suryaningsih, T. Widayatno, A. Sugiharto, and A. M. Fuadi, “The Effectivity of Aluminum Electrode for River Water Purification Using Electrocoagulation,” IOP Conf Ser Mater Sci Eng, vol. 1053, no. 1, p. 012130, Feb. 2021, doi: 10.1088/1757-899x/1053/1/012130.

E. T. Al-Hanif and A. Y. Bagastyo, “Electrocoagulation for drinking water treatment: A review,” in IOP Conference Series: Earth and Environmental Science, IOP Publishing Ltd, Jun. 2021. doi: 10.1088/1755-1315/623/1/012016.

S. Vasudevan, J. Lakshmi, and G. Sozhan, “Studies on the removal of iron from drinking water by electrocoagulation - A clean process,” Clean (Weinh), vol. 37, no. 1, pp. 45–51, 2009, doi: 10.1002/clen.200800175.

T.-H. Kim, C. Park, E.-B. Shin, and S. Kim, “Decolorization of disperse and reactive dyes by continuous electrocoagulation process,” 2002. [Online]. Available: www.elsevier.com/locate/desal

B. Zhu, D. A. Clifford, and S. Chellam, “Comparison of electrocoagulation and chemical coagulation pretreatment for enhanced virus removal using microfiltration membranes,” Water Res, vol. 39, no. 13, pp. 3098–3108, 2005, doi: 10.1016/j.watres.2005.05.020.

P. R. Kumar, S. Chaudhari, K. C. Khilar, and S. P. Mahajan, “Removal of arsenic from water by electrocoagulation,” Chemosphere, vol. 55, no. 9, pp. 1245–1252, Jun. 2004, doi: 10.1016/j.chemosphere.2003.12.025.

J. N. Merrill and John Merrill Foundation, Day pilgrimage walks to Cambridgeshire’s cathedrals.

C. Y. Hu, S. L. Lo, W. H. Kuan, and Y. D. Lee, “Removal of fluoride from semiconductor wastewater by electrocoagulation- flotation,” Water Res, vol. 39, no. 5, pp. 895–901, 2005, doi: 10.1016/j.watres.2004.11.034.

J. A. G. Gomes et al., “Arsenic removal by electrocoagulation using combined Al-Fe electrode system and characterization of products,” J Hazard Mater, vol. 139, no. 2, pp. 220–231, Jan. 2007, doi: 10.1016/j.jhazmat.2005.11.108.

A. Alverez-Gallegos and D. Pletcher, “The removal of low level organics via hydrogen peroxide formed in a reticulated vitreous carbon cathode cell. Part 2: The removal of phenols and related compounds from aqueous e‚uents.”

A. K. Golder, N. Hridaya, A. N. Samanta, and S. Ray, “Electrocoagulation of methylene blue and eosin yellowish using mild steel electrodes,” J Hazard Mater, vol. 127, no. 1–3, pp. 134–140, Dec. 2005, doi: 10.1016/j.jhazmat.2005.06.032.

K. L. Dubrawski and M. Mohseni, “Standardizing electrocoagulation reactor design: Iron electrodes for NOM removal,” Chemosphere, vol. 91, no. 1, pp. 55–60, 2013, doi: 10.1016/j.chemosphere.2012.11.075.

I. Linares-Hernández, C. Barrera-Díaz, G. Roa-Morales, B. Bilyeu, and F. Ureña-Núñez, “A combined electrocoagulation-sorption process applied to mixed industrial wastewater,” J Hazard Mater, vol. 144, no. 1–2, pp. 240–248, May 2007, doi: 10.1016/j.jhazmat.2006.10.015.

X. Chen and H. Deng, “Removal of humic acids from water by hybrid titanium-based electrocoagulation with ultrafiltration membrane processes,” Desalination, vol. 300, pp. 51–57, Aug. 2012, doi: 10.1016/j.desal.2012.06.004.

L. Smoczyński, M. K. Teresa, P. Bogusław, and K. Marta, “Electrocoagulation of model wastewater using aluminum electrodes,” Polish Journal of Chemical Technology, vol. 14, no. 3, pp. 66–70, Oct. 2012, doi: 10.2478/v10026-012-0086-1.

D. T. Moussa, M. H. El-Naas, M. Nasser, and M. J. Al-Marri, “A comprehensive review of electrocoagulation for water treatment: Potentials and challenges,” Journal of Environmental Management, vol. 186. Academic Press, pp. 24–41, Jan. 15, 2017. doi: 10.1016/j.jenvman.2016.10.032.

S. Garcia-Segura, M. M. S. G. Eiband, J. V. de Melo, and C. A. Martínez-Huitle, “Electrocoagulation and advanced electrocoagulation processes: A general review about the fundamentals, emerging applications and its association with other technologies,” Journal of Electroanalytical Chemistry, vol. 801. Elsevier B.V., pp. 267–299, Sep. 15, 2017. doi: 10.1016/j.jelechem.2017.07.047.

A. Khadir, M. Negarestani, and M. Motamedi, “Optimization of an electrocoagulation unit for purification of ibuprofen from drinking water: Effect of conditions and linear/non-linear isotherm study,” Separation Science and Technology (Philadelphia), vol. 56, no. 8, pp. 1431–1449, 2021, doi: 10.1080/01496395.2020.1770795.

M. Alimohammadi et al., “Elimination of natural organic matter by electrocoagulation using bipolar and monopolar arrangements of iron and aluminum electrodes,” International Journal of Environmental Science and Technology, vol. 14, no. 10, pp. 2125–2134, Jun. 2017, doi: 10.1007/s13762-017-1402-3.

2010r K Purkait, “Treatment of drinking water containing iron using Electrocoagulation,” Int. J. Environmental Engineering, vol. 2, no. 3. pp. 212–227, 2010.

N. Modirshahla, M. A. Behnajady, and S. Kooshaiian, “Investigation of the effect of different electrode connections on the removal efficiency of Tartrazine from aqueous solutions by electrocoagulation,” Dyes and Pigments, vol. 74, no. 2, pp. 249–257, 2007, doi: 10.1016/j.dyepig.2006.02.006.

M. I. Alali, “Performance Evaluation of Electrocoagulation Technique for Removing Groundwater Hardness of Tikrit University Performance Evaluation of Electrocoagulation Technique for Removing Groundwater,” 2012. [Online]. Available: www.pdffactory.com

E. A. Anwer and B. A. A. Majeed, “Different Electrodes Connections in Electrocoagulation of Synthetic Blow down Water of Cooling Tower,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 21, no. 1, pp. 1–7, Jun. 2020, doi: 10.31699/ijcpe.2020.1.1.

M. Kobya, O. T. Can, and M. Bayramoglu, “Treatment of textile wastewaters by electrocoagulation using iron and aluminum electrodes,” J Hazard Mater, vol. 100, no. 1–3, pp. 163–178, Jun. 2003, doi: 10.1016/S0304-3894(03)00102-X.

S. Vasudevan, J. Jayaraj, J. Lakshmi, and G. Sozhan, “Removal of iron from drinking water by electrocoagulation: Adsorption and kinetics studies,” Korean Journal of Chemical Engineering, vol. 26, no. 4, pp. 1058–1064, 2009, doi: 10.1007/s11814-009-0176-9.

W. Den and C. Huang, “Electrocoagulation of Silica Nanoparticles in Wafer Polishing Wastewater by a Multichannel Flow Reactor: A Kinetic Study,” Journal of Environmental Engineering, vol. 132, no. 12, pp. 1651–1658, Dec. 2006, doi: 10.1061/(asce)0733-9372(2006)132:12(1651).

S. Vasudevan, F. Epron, J. Lakshmi, S. Ravichandran, S. Mohan, and G. Sozhan, “Removal of NO3- from drinking water by electrocoagulation - An alternate approach,” Clean (Weinh), vol. 38, no. 3, pp. 225–229, Jun. 2010, doi: 10.1002/clen.200900226.

C. Y. Hu, S. L. Lo, and W. H. Kuan, “Effects of co-existing anions on fluoride removal in electrocoagulation (EC) process using aluminum electrodes,” Water Res, vol. 37, no. 18, pp. 4513–4523, 2003, doi: 10.1016/S0043-1354(03)00378-6.

D. Ghernaout, A. Badis, A. Kellil, and B. Ghernaout, “Application of electrocoagulation in Escherichia coli culture and two surface waters,” Desalination, vol. 219, no. 1–3, pp. 118–125, Jan. 2008, doi: 10.1016/j.desal.2007.05.010.

M. Lanzarini-Lopes, S. Garcia-Segura, K. Hristovski, and P. Westerhoff, “Electrical energy per order and current efficiency for electrochemical oxidation of p-chlorobenzoic acid with boron-doped diamond anode,” Chemosphere, vol. 188, pp. 304–311, 2017, doi: 10.1016/j.chemosphere.2017.08.145.

A. A. Al-Raad et al., “Treatment of saline water using electrocoagulation with combined electrical connection of electrodes,” Processes, vol. 7, no. 5, Jun. 2019, doi: 10.3390/pr7050242.

V. Khandegar and A. K. Saroha, “Electrocoagulation for the treatment of textile industry effluent - A review,” Journal of Environmental Management, vol. 128. pp. 949–963, Oct. 15, 2013. doi: 10.1016/j.jenvman.2013.06.043.

D. Ghosh, H. Solanki, and M. K. Purkait, “Removal of Fe(II) from tap water by electrocoagulation technique,” J Hazard Mater, vol. 155, no. 1–2, pp. 135–143, Jun. 2008, doi: 10.1016/j.jhazmat.2007.11.042.

E. Bazrafshan, A. H. Mahvi, and M. ali Zazouli, “Textile Wastewater Treatment by Electrocoagulation Process using Aluminum Electrodes,” Iranian Journal Of Health Sciences, vol. 2, no. 1, pp. 16–29, Mar. 2014, doi: 10.18869/acadpub.jhs.2.1.16.

Y. S. Tlaiaa, Z. A. R. Naser, and A. H. Ali, “Comparison between coagulation and electrocoagulation processes for the removal of reactive black dye RB-5 and cod reduction,” Desalination Water Treat, vol. 195, pp. 154–161, Aug. 2020, doi: 10.5004/dwt.2020.25914.

G. Mouedhen, M. Feki, M. D. P. Wery, and H. F. Ayedi, “Behavior of aluminum electrodes in electrocoagulation process,” J Hazard Mater, vol. 150, no. 1, pp. 124–135, Jun. 2008, doi: 10.1016/j.jhazmat.2007.04.090.

C. C. He, C. Y. Hu, and S. L. Lo, “Integrating chloride addition and ultrasonic processing with electrocoagulation to remove passivation layers and enhance phosphate removal,” Sep Purif Technol, vol. 201, pp. 148–155, Aug. 2018, doi: 10.1016/j.seppur.2018.03.011.

M. Moradi, Y. Vasseghian, H. Arabzade, and A. Mousavi Khaneghah, “Various wastewaters treatment by sono-electrocoagulation process: A comprehensive review of operational parameters and future outlook,” Chemosphere, vol. 263, Jan. 2021, doi: 10.1016/j.chemosphere.2020.128314.

F. Özyonar, Ö. Gökkuş, and M. Sabuni, “Removal of disperse and reactive dyes from aqueous solutions using ultrasound-assisted electrocoagulation,” Chemosphere, vol. 258, Nov. 2020, doi: 10.1016/j.chemosphere.2020.127325.

P. V. Nidheesh and T. S. A. Singh, “Arsenic removal by electrocoagulation process: Recent trends and removal mechanism,” Chemosphere, vol. 181. Elsevier Ltd, pp. 418–432, 2017. doi: 10.1016/j.chemosphere.2017.04.082.

S. Sen, A. K. Prajapati, A. Bannatwala, and D. Pal, “Electrocoagulation treatment of industrial wastewater including textile dyeing effluent – A review,” Desalination Water Treat, vol. 161, pp. 21–34, Jun. 2019, doi: 10.5004/dwt.2019.24302.

S. Vasudevan, J. Lakshmi, and G. Sozhan, “Effects of alternating and direct current in electrocoagulation process on the removal of cadmium from water,” J Hazard Mater, vol. 192, no. 1, pp. 26–34, Aug. 2011, doi: 10.1016/j.jhazmat.2011.04.081.

S. Aoudj, A. Khelifa, N. Drouiche, M. Hecini, and H. Hamitouche, “Electrocoagulation process applied to wastewater containing dyes from textile industry,” Chemical Engineering and Processing: Process Intensification, vol. 49, no. 11, pp. 1176–1182, Nov. 2010, doi: 10.1016/j.cep.2010.08.019.

N. Galvão, J. B. de Souza, and C. M. de Sousa Vidal, “Landfill leachate treatment by electrocoagulation: Effects of current density and electrolysis time,” J Environ Chem Eng, vol. 8, no. 5, Oct. 2020, doi: 10.1016/j.jece.2020.104368.

E. Bazrafshan, H. Moein, F. Kord Mostafapour, and S. Nakhaie, “Application of electrocoagulation process for dairy wastewater treatment,” J Chem, 2013, doi: 10.1155/2013/640139.

N. Daneshvar, A. Oladegaragoze, and N. Djafarzadeh, “Decolorization of basic dye solutions by electrocoagulation: An investigation of the effect of operational parameters,” J Hazard Mater, vol. 129, no. 1–3, pp. 116–122, Feb. 2006, doi: 10.1016/j.jhazmat.2005.08.033.

J. U. Halpegama et al., “Concurrent removal of hardness and fluoride in water by monopolar electrocoagulation,” J Environ Chem Eng, vol. 9, no. 5, Jun. 2021, doi: 10.1016/j.jece.2021.106105.

A. Y. Goren and M. Kobya, “Arsenic removal from groundwater using an aerated electrocoagulation reactor with 3D Al electrodes in the presence of anions,” Chemosphere, vol. 263, Jan. 2021, doi: 10.1016/j.chemosphere.2020.128253.

M. Elazzouzi, K. Haboubi, M. S. Elyoubi, and A. El Kasmi, “Development of a novel electrocoagulation anode for real urban wastewater treatment: Experimental and modeling study to optimize operative conditions,” Arabian Journal of Chemistry, vol. 14, no. 1, Jan. 2021, doi: 10.1016/j.arabjc.2020.11.018.

P. Sefatjoo, M. R. Alavi Moghaddam, and A. R. Mehrabadi, “Evaluating electrocoagulation pretreatment prior to reverse osmosis system for simultaneous scaling and colloidal fouling mitigation: Application of RSM in performance and cost optimization,” Journal of Water Process Engineering, vol. 35, Jun. 2020, doi: 10.1016/j.jwpe.2020.101201.

K. A. Sitterley, J. Rosenblum, B. Ruyle, R. Keliher, and K. G. Linden, “Factors impacting electrocoagulation treatment of hydraulic fracturing fluids and removal of common fluid additives and scaling ions,” J Environ Chem Eng, vol. 8, no. 3, Jun. 2020, doi: 10.1016/j.jece.2020.103728.

A. M. Alkhatib, A. H. Hawari, M. A. Hafiz, and A. Benamor, “A novel cylindrical electrode configuration for inducing dielectrophoretic forces during electrocoagulation,” Journal of Water Process Engineering, vol. 35, Jun. 2020, doi: 10.1016/j.jwpe.2020.101195.

D. Parmentier, D. Manhaeghe, L. Baccini, R. Van Meirhaeghe, D. P. L. Rousseau, and S. Van Hulle, “A new reactor design for harvesting algae through electrocoagulation-flotation in a continuous mode,” Algal Res, vol. 47, May 2020, doi: 10.1016/j.algal.2020.101828.

S. Opoku-Duah and D. Johnson, “Removal of Perfluorooctanoic Acid and Microcystins from Drinking Water by Electrocoagulation,” J Chem, vol. 2020, 2020, doi: 10.1155/2020/1836264.

A. H. Hawari, M. Al-Ghoul, M. A. Hafiz, A. T. Yasir, K. Aljaml, and A. Ltaief, “Steel slag promoted electrocoagulation process for the treatment of produced water,” Desalination Water Treat, vol. 177, pp. 80–88, Feb. 2020, doi: 10.5004/dwt.2020.24881.

Z. Qi, S. You, R. Liu, and C. J. Chuah, “Performance and mechanistic study on electrocoagulation process for municipal wastewater treatment based on horizontal bipolar electrodes,” Front Environ Sci Eng, vol. 14, no. 3, Jun. 2020, doi: 10.1007/s11783-020-1215-3.

G. Jing, S. Ren, Y. Gao, W. Sun, and Z. Gao, “Electrocoagulation: A promising method to treat and reuse mineral processing wastewater with high COD,” Water (Switzerland), vol. 12, no. 2, Feb. 2020, doi: 10.3390/w12020595.

F. Y. AlJaberi, S. A. Ahmed, and H. F. Makki, “Electrocoagulation treatment of high saline oily wastewater: evaluation and optimization,” Heliyon, vol. 6, no. 6, Jun. 2020, doi: 10.1016/j.heliyon.2020.e03988.

E. Güneş and Z. B. Gönder, “Evaluation of the hybrid system combining electrocoagulation, nanofiltration and reverse osmosis for biologically treated textile effluent: Treatment efficiency and membrane fouling,” J Environ Manage, vol. 294, Sep. 2021, doi: 10.1016/j.jenvman.2021.113042.

H. A. Gzar, N. A. Jasim, and K. M. Kseer, “Electrocoagulation and chemical coagulation for treatment of Al-Kut textile wastewater: A comparative study,” vol. 8, no. 3, pp. 1580–1590, 2020.

D. R. Ryan, P. J. McNamara, and B. K. Mayer, “Iron-electrocoagulation as a disinfection byproduct control strategy for drinking water treatment,” Environ Sci (Camb), vol. 6, no. 4, pp. 1116–1124, Apr. 2020, doi: 10.1039/d0ew00106f.

M. P. M. Combatt, W. C. S. Amorim, E. M. da S. Brito, A. F. Cupertino, R. C. S. Mendonça, and H. A. Pereira, “Design of parallel plate electrocoagulation reactors supplied by photovoltaic system applied to water treatment,” Comput Electron Agric, vol. 177, Oct. 2020, doi: 10.1016/j.compag.2020.105676.

T. Mikunthan and M. Senthilnanthanan, “Investigation of electrocoagulation reactor design parameters effect on removing hardness from drinking water using iron electrodes Salt water tolerance aedes and gene expression View project Identification of Alage View project,” 2019. [Online]. Available: https://www.researchgate.net/publication/337856589

S. Chikalage, “Performance Evaluation of Electrocoagulation Process for Removing Hardness from Bore Well Water,” Int J Res Appl Sci Eng Technol, vol. 6, no. 3, pp. 1934–1938, Jun. 2018, doi: 10.22214/ijraset.2018.3300.

Downloads

Published

2024-03-01

How to Cite

Factors Affecting Electrocoagulation Process for Different Water Types: A review. (2024). Al-Khwarizmi Engineering Journal, 20(1), 17-32. https://doi.org/10.22153/kej.2024.10.001

Publication Dates