كيفية الاقتباس
تواريخ المنشور
الإستلام
النسخة النهائية
الموافقة
الملخص
Abstract
Pulsed laser deposition (PLD) has become a widespread technology for the fabrication of multicomponent thin films Material. In this research, the Microstructure phase, composition and effect of paint made from A nanomaterial (Alfa- Al2O3) were study, A Pulsed laser deposition used in order to improving mechanical performance of aluminum alloy (AL-2618) of turbocharger blades, The main advantages of using it in the manufacture of turbocharger blades to reduce corrosion and erosion, and to ensure high hardness and long-life fatigue, The Pulsed laser deposition used for turbocharger blade, to deposit a layer of aluminum dioxide (10 m) on the surface of the aluminum alloy. The mechanical properties of the blade improved where the hardness of the samples examined and conducted an (EDX) test before and after the deposition process. It was found that after depositing a Nano-layer of aluminum dioxide (Al2O3), the hardness increased and the corrosion and erosion were reduced.
المراجع
Kaka Ma, Yufeng Zheng, Sriswaroop Dasari, Dalong Zhang, Hamish L. Fraser & Rajarshi Banerjee ,” Precipitation in nanostructured alloys: A brief review”, Volume 46, pages 250–257, (2021).
V. I. Arkhipenko, S, M, Zgirouski, A. A. Kirillov, and L. V. Simonchik, Plasma Physics Reports, 28, 930 (2002).
Kun Yu, Wenxian Li, Songrui Li, Jun Zhao,” Mechanical properties and microstructure of aluminum alloy 2618 with Al3(Sc, Zr) phases”, Materials Science and Engineering: A,Volume 368, Issues 1–2, 15 March 2004, Pages 88-93.
P.Malekzadeh,"A differential Quadrature Nonlinear Free Vibration Analysis of Laminated Composite Skew Thin Plates", Journal of thin wall Structures ,Vol.(45),pp.237-250,January 2007.
J.E. Samad, J.A. Nychka, Wettability of biomimetic thermally grown aluminum oxide coatings, Bioinsp. Biomim. 6 (2011) 016004–016009.
J.F. Joanny, Polyelectrolyte adsorption and charge inversion, Eur. Phys. J. B 9,(1999).
I. N. A. Oguocha, S. Yannacopoulos and Y. Jin, The structure of AIXFeNi phase in Al-Cu-Mg-Fe-Ni, J. Mater. Sci., Vol. 31 (1996), 5615–5621.
J. H. Wang, D. Q. Yi and X. P. Su, et al., Influence of deformation ageing treatment on microstructure and properties of aluminum alloy 2618, Mater. Charact. Vol. 59 (2008), 965–968.
Z. W. Du, G. J. Wang and X. L. Han, et al., Microstructural evolution after creep in aluminum alloy 2618, J. Mater. Sci., Vol. 47 (2012), 2541–2547
Akeel Dhahir Subhi and Adnan Mohsen Abd,” Improving Wear Properties of 392 Al Alloy Using Centrifugal Casting”, Department of Production Engineering and Metallurgy / University of Technology/ Baghdad, Vol. 15 No. 1 (2019): Al-Khwarizmi Engineering Journal
Alalkawi H. J. M., Ali Yousuf K Khenyab andAbduljabar H. Ali,” Improvement of Mechanical and Fatigue Properties for Aluminum Alloy 7049 By Using Nano Composites Technique”, Department of Electromechanical Engineering/ University of Technology/ Baghdad/ Iraq, DOI: https://doi.org/10.22153/kej.2019.08.001, Vol. 15 No. 1 (2019): Al-Khwarizmi Engineering Journal.
N. Mathan Kumar a, S. Senthil Kumaran b, L.A. Kumaraswamidhas a,” An investigation of mechanical properties and corrosion resistance of Al2618 alloy reinforced with Si3N4, AlN and ZrB2 composites”, Journal of Alloys and Compounds Volume 652, 15 December 2015, Pages 244-249.
Saad Abdel Wahed Tohme1, Hana Khaled Khalaf, Nour Ali Nasser, Ahmed Dawoud Salman,”Manufacturing of aluminum alloy reinforced polymer and the possibility of using it in a solar heater”, Industrial Research and Development Authority - Renewable Energy and Environment Research Center.
Aseel Basim Abdul-Hussein, Fadhel Abbas Hashim and Tamara Raad Kadhim,” Effect of Nano Powder on Mechanical and Physical Properties of Glass Fiber Reinforced Epoxy Composite”,Department of Materials Engineering/ University of Technology, Vol. 12 No. 3 (2016): 2016.
D. Bäuerle: Laser Processing and Chemistry, 2nd ed. (Springer, Berlin).
W. Marine, B. Luk'yanchuk, M. Sentis: Le VIDE Science, technique et applications, 2=4, 440 (1998).
Frank Feret,Daniel Roy and Clermont Boulanger,” Determination of alpha and beta alumina in ceramic alumina by X-ray diffraction”, July 2000,Spectrochimica Act Part B Atomic Spectroscopy 55(7):1051-1061.
J.H. Wang and D.Q. Yi ,”Preparation and Properties of Alloy 2618 Reinforced by Submicron AlN Particles”, (Submitted February 15, 2005; in revised form November 17, 2005).
Ifeyinwa Obianyo,”LABORATORY MANUAL FOR HARDNESS TEST”, Nile University of Nigeria, Abuja ,March 2019.
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
الحقوق الفكرية (c) 2024 مجلة الخوارزمي الهندسية