Corrosion Behavior of Ti-6Al-4V Alloy in Different Media

Authors

  • Majid H. Abdulmageed Department of Materials Engineering/ University of Technology
  • Slafa I. Ibrahim Energy and Fuel Research Center/ University of Technology

Abstract

     In this work the corrosion behavior of Ti-6Al-4V alloy was studied by using galvanostatic measurements at room temperature in different media which includ sodium chloride (food salt), sodium tartrate (presence in jellies, margarine, and sausage casings,etc.), sodium oxalate (presence in fruits, vegetables,etc.), acetic acid (presence in vinegar), phosphoric acid (presence in drink), sodium carbonate (presence in 7up drink,etc.), and sodium hydroxide in order to compare.

     Corrosion parameters were interpreted in these media which involve corrosion potential( Ecorr) and corrosion current density (icorr), since the results of (Ecorr) indicate that Oxalate ions are more corrosive than other materials while the results of (icorr) indicate that NaCl is more corrosive than other materials. Cathodic and Anodic Tafel slopes that were used to calculate the polarization resistance (Rp) to know which materials effect on Ti-6Al-4V alloy uses in dental materials and the results of (Rp) were: Na2CO3 >Oxalate >H3PO4 >CH3COOH >NaOH >Tartrate >NaCl.

    The change in free energy (∆G) and rate of corrosion in (mpy) were calculated, and the results of rate indicate that increasing in the following sequences:  NaCl>Tartrate >NaOH >Oxalate> CH3COOH> H3PO4> Na2CO3.

 

Downloads

Download data is not yet available.

References

[1] John F. McCab, Anderson`s, Applied dental materials / Blackwell Scientific publications, 1985.
[2] Smith BJ,Ducheyne P,Transitional Behavior in Ti-6AL-4V fretting corrosion , pages 12 published : Jan 1996 ,Source ; STP1272-EB .
[3] Latifa kivnani and abdelilah, corrosion inhibition of Titanium in Artificial saliva containing fluoride, Equip ď Electrochimic et matēriaux inorganiques Marco [email protected], 2004.
[4] M. Nakagawa, S. Matsuya, T. Shiraishi and M. Ohta, Journal of Dental Research, Vol. 78, 1568-1572, 1999
[5] http:/ www. Astm, org/ DIGITAL_LIBRARY/ STP/ SOURCE_ PAGES/STP 1272. Htm, p11, 2007.
[6] Heitz E. and Schwenk W., Br.Corrosion J., Vol.11, No.2, 1976.
[7] Shreir L.L. “Corrosion”, Metal/Environment reactions, second edition Vol.1, 1976.
[8] Saleh J.M., Al-Shama L. M., and Hikmat N.A., Corrosion Sci., Vol.27,pp.22, 1987.
[9] Saleh J. M., Saleh K. A., and Hikmat N. A., Iraqi J. Sci., Vol.36, pp.803, 1995.

Downloads

Published

2010-09-01

How to Cite

Corrosion Behavior of Ti-6Al-4V Alloy in Different Media. (2010). Al-Khwarizmi Engineering Journal, 6(3), 77-84. https://alkej.uobaghdad.edu.iq/index.php/alkej/article/view/504

Publication Dates