Review of Current Trends, Materials and Challenges in 3D Printing for Biomedical Applications Using Polylactic Acid

[1] Z. Yang, G. Yin, S. Sun, and P. Xu, “Medical applications and prospects of polylactic acid materials,” iScience, vol. 27, no. 12, p. 111512, Dec. 2024. https://doi.org/10.1016/j.isci.2024.111512

[2] A. A. Elsonbaty, A. M. Rashad, O. Y. Abass, T. Y. Abdelghany, and A. M. Alfauiomy, “A survey of fused deposition modeling (FDM) technology in 3D printing,” J. Eng. Res. Rep., vol. 26, no. 11, pp. 304–312, Nov. 2024. https://doi.org/10.9734/jerr/2024/v26i111332

[3] K. Rajan, M. Samykano, K. Kadirgama, W. S. W. Harun, and M. M. Rahman, “Fused deposition modeling: Process, materials, parameters, properties, and applications,” Int. J. Adv. Manuf. Technol., vol. 120, no. 3–4, pp. 1531–1570, May 2022. https://doi.org/10.1007/s00170-022-08860-7

[4] A. Zotti, T. Paduano, F. Napolitano, S. Zuppolini, M. Zarrelli, and A. Borriello, “Fused deposition modeling of polymer composites: Development, properties, and applications,” Polymers, vol. 17, no. 8, p. 1054, Apr. 2025. https://doi.org/10.3390/polym17081054

[5] D. Acierno and A. Patti, “Fused deposition modelling (FDM) of thermoplastic-based filaments: Process and rheological properties—An overview,” Materials, vol. 16, no. 24, p. 7664, Dec. 2023. https://doi.org/10.3390/ma16247664

[6] A. Sharma and A. Rai, “Fused deposition modelling (FDM)-based 3D and 4D printing: A state-of-art review,” Mater. Today Proc., vol. 62, pp. 367–372, 2022. https://doi.org/10.1016/j.matpr.2022.03.679

[7] H. Ardeshir, M. Hoseinzadeh, M. B. Limooei, and S. Hosseini, “A scientometrics study and its practical implications for fused deposition modeling,” Alex. Eng. J., vol. 99, pp. 217–231, Jul. 2024. https://doi.org/10.1016/j.aej.2024.05.009

[8] L. Sandanamsamy et al., “A comprehensive review on fused deposition modelling of polylactic acid,” Prog. Addit. Manuf., vol. 8, no. 5, pp. 775–799, Oct. 2023. https://doi.org/10.1007/s40964-022-00356-w

[9] K. I. Ismail, T. C. Yap, and R. Ahmed, “3D-printed fiber-reinforced polymer composites by fused deposition modelling (FDM): Fiber length and fiber implementation techniques,” Polymers, vol. 14, no. 21, p. 4659, Nov. 2022. https://doi.org/10.3390/polym14214659

[10] M. S. Rais, M. B. Winfield, and D. A. Jansen, “The use of 3D-printed prostheses in reconstructive surgery with implications in plastic surgery and radiology: A narrative review,” Cureus, vol. 17, no. 4, p. e81848, Apr. 2025. https://doi.org/10.7759/cureus.81848

[11] D. Mocerino, M. R. Ricciardi, V. Antonucci, and I. Papa, “Fused deposition modelling of polymeric auxetic structures: A review,” Polymers, vol. 15, no. 4, p. 1008, Feb. 2023. https://doi.org/10.3390/polym15041008

[12] Y. Mei, C. He, C. Gao, P. Zhu, G. Lu, and H. Li, “3D-printed degradable anti-tumor scaffolds for controllable drug delivery,” Int. J. Bioprint., vol. 7, no. 4, p. 418, Oct. 2021. https://doi.org/10.18063/ijb.v7i4.418

[13] F. Wang, F. Luo, Y. Huang, X. Cao, and C. Yuan, “4D printing via multispeed fused deposition modeling,” Adv. Mater. Technol., vol. 8, no. 2, Jan. 2023. https://doi.org/10.1002/admt.202301383

[14] Y. Jeon, M. Kim, and K. H. Song, “Development of hydrogels fabricated via stereolithography for bioengineering applications,” Polymers, vol. 17, no. 6, p. 765, Mar. 2025. https://doi.org/10.3390/polym17060765

[15] A. Husna, S. Ashrafi, A. A. Tomal, N. T. Tuli, and A. Bin Rashid, “Recent advancements in stereolithography (SLA) and their optimization of process parameters for sustainable manufacturing,” Hybrid Adv., vol. 7, p. 100307, Dec. 2024. https://doi.org/10.1016/j.hybadv.2024.100307

[16] N. Vidhu, A. Gupta, R. Salajeghe, J. Spangenberg, and D. Marla, “A computational model for stereolithography apparatus (SLA) 3D printing,” Prog. Addit. Manuf., vol. 9, no. 6, pp. 1605–1619, Dec. 2024. https://doi.org/10.1007/s40964-023-00525-5

[17] A. J. R. Barcena, P. Ravi, S. Kundu, and K. Tappa, “Emerging biomedical and clinical applications of 3D-printed poly(lactic acid)-based devices and delivery systems,” Bioengineering, vol. 11, no. 7, p. 705, Jul. 2024. https://doi.org/10.3390/bioengineering11070705

[18] G. A. Appuhamillage, S. S. Ambagaspitiya, R. S. Dassanayake, and A. Wijenayake, “3D and 4D printing of biomedical materials: Current trends, challenges, and future outlook,” Explor. Med., vol. 5, no. 1, pp. 17–47, Feb. 2024. https://doi.org/10.37349/emed.2024.00203

[19] A. Afridi, A. Al Rashid, and M. Koç, “Recent advances in the development of stereolithography-based additive manufacturing processes: A review of applications and challenges,” Bioprinting, vol. 43, p. e00360, Nov. 2024. https://doi.org/10.1016/j.bprint.2024.e00360

[20] G. E. S. Garcia, R. R. de Sousa Junior, J. R. Gouveia, and D. J. dos Santos, “Graphene oxide-based nanocomposites for stereolithography (SLA) 3D printing: Comprehensive mechanical characterization under combined loading modes,” Polymers, vol. 16, no. 9, p. 1261, May 2024. https://doi.org/10.3390/polym16091261

[21] S. Fournier, J. Chevalier, G. P. Baeza, C. Chaput, and E. Louradour, “Ceria-stabilized zirconia-based composites printed by stereolithography: Impact of the processing method on the ductile behaviour and its transformation features,” J. Eur. Ceram. Soc., vol. 43, no. 7, pp. 2894–2906, Jul. 2023. https://doi.org/10.1016/j.jeurceramsoc.2022.11.006

[22] P. Lakkala, S. R. Munnangi, S. Bandari, and M. Repka, “Additive manufacturing technologies with emphasis on stereolithography 3D printing in pharmaceutical and medical applications: A review,” Int. J. Pharm. X, vol. 5, p. 100159, Dec. 2023. https://doi.org/10.1016/j.ijpx.2023.100159

[23] M. S. Gulati, M. S. Kumar, and J. Arora, “Stereolithography in implant placement,” Int. J. Health Sci. (Qassim), vol. 5, no. S2, pp. 23–27, Mar. 2022. https://doi.org/10.53730/ijhs.v5nS2.5344

[24] Q. Sun, Z. Guo, Z. Li, Y. Zhu, J. Wang, and H. Li, “Stereolithography 3D printing of transparent resin lens for high-power phosphor-coated WLEDs packaging,” J. Manuf. Process., vol. 85, pp. 756–763, Jan. 2023. https://doi.org/10.1016/j.jmapro.2022.11.026

[25] Y. J. Kim, H. N. Kim, and D. Y. Kim, “A study on effects of curing and machining conditions in post-processing of SLA additive manufactured polymer,” J. Manuf. Process., vol. 119, pp. 511–519, Jun. 2024. https://doi.org/10.1016/j.jmapro.2024.03.112

[26] M. U. Azam, I. Belyamani, A. Schiffer, S. Kumar, and K. Askar, “Progress in selective laser sintering of multifunctional polymer composites for strain- and self-sensing applications,” J. Mater. Res. Technol., vol. 30, pp. 9625–9646, May 2024. https://doi.org/10.1016/j.jmrt.2024.06.024

[27] X. Li, H. Ouyang, S. Sun, J. Wang, G. Fei, and H. Xia, “Selective laser sintering for electrically conductive poly(dimethylsiloxane) composites with self-healing lattice structures,” ACS Appl. Polym. Mater., vol. 5, no. 4, pp. 2944–2955, Apr. 2023. https://doi.org/10.1021/acsapm.3c00138

[28] A. G. Tabriz, H. Kuofie, J. Scoble, S. Boulton, and D. Douroumis, “Selective laser sintering for printing pharmaceutical dosage forms,” J. Drug Deliv. Sci. Technol., vol. 86, p. 104699, Sep. 2023. https://doi.org/10.1016/j.jddst.2023.104699

[29] L. A. Junqueira, V. A. Thilak, P. Alam, C. Tuleu, V. Garg, and D. Douroumis, “Selective laser sintering for printing bilayer tablets,” Int. J. Pharm., vol. 670, p. 125116, Feb. 2025. https://doi.org/10.1016/j.ijpharm.2024.125116

[30] A. G. Tabriz, Q. Gonot‑Munck, A. Baudoux, V. Garg, R. Farnish, O. L. Katsamenis, H.-W. Hui, N. Boersen, S. Roberts, J. Jones, and D. Douroumis, “3D printing of personalised carvedilol tablets using selective laser sintering,” Pharmaceutics, vol. 15, no. 9, p. 2230, Aug. 2023. https://doi.org/10.3390/pharmaceutics15092230

[31] R. Biswal and A. Ganesan, “Experimental investigation of design parameters on geometrical accuracy of selective laser sintered parts,” J. Manuf. Process., vol. 108, pp. 48–61, Dec. 2023. https://doi.org/10.1016/j.jmapro.2023.10.059

[32] R. Tonello, K. Conradsen, D. B. Pedersen, and J. R. Frisvad, “Surface roughness and grain size variation when 3D printing polyamide 11 parts using selective laser sintering,” Polymers, vol. 15, no. 13, p. 2967, Jul. 2023. https://doi.org/10.3390/polym15132967

[33] N. R. Khatri, J. A. Smith, and P. F. Egan, “Dimensional and mechanical characterization of nylon lattice, spring, and non-assembly designs fabricated with selective laser sintering,” Prog. Addit. Manuf., early access, Feb. 2025. https://doi.org/10.1007/s40964-025-01019-2

[34] K. Cerdan, J. Brancart, H. De Coninck, B. Van Hooreweder, G. Van Assche, and P. Van Puyvelde, “Laser sintering of self-healable and recyclable thermoset networks,” Eur. Polym. J., vol. 175, p. 111383, Jul. 2022. https://doi.org/10.1016/j.eurpolymj.2022.111383

[35] W. Han, L. Kong, and M. Xu, “Advances in selective laser sintering of polymers,” Int. J. Extrem. Manuf., vol. 4, no. 4, Art. no. 042002, Dec. 2022.

https://doi.org/10.1088/2631-7990/ac9096

[36] M. Subramaniyan, S. Karuppan, S. Helaili, and I. Ahmad, “Structural, mechanical, and in-vitro characterization of hydroxyapatite loaded PLA composites,” J. Mol. Struct., vol. 1306, p. 137862, Jun. 2024. https://doi.org/10.1016/j.molstruc.2024.137862

[37] D.-M. Zhou, X.-N. Zhang, J.-Y. Li, X.-H. Sun, J. Li, and J. Zhang, “Strong and osteoconductive poly(lactic acid) biocomposites by high-shear liquid dispersion of hydroxyapatite nanowhiskers,” Nanocomposites, vol. 8, no. 1, pp. 24–33, Dec. 2022. https://doi.org/10.1080/20550324.2022.2054212

[38] L. Narayanan P and S. A, “Study on distribution of hydroxyapatite (HA) in twin screw extruded cum injection moulded polylactic acid (PLA) composites and their effect on mechanical property,” Adv. Compos. Mater., pp. 1–26, Sep. 2024. https://doi.org/10.1080/09243046.2024.2397615

[39] N. Tazibt, M. Kaci, N. Dehouche, M. Ragoubi, and L. I. Atanase, “Effect of filler content on the morphology and physical properties of poly(lactic acid)-hydroxyapatite composites,” Materials, vol. 16, no. 2, p. 809, Jan. 2023. https://doi.org/10.3390/ma16020809

[40] S. Sitthisang, X. Hou, A. Treetong, X. Xu, W. Liu, C. He, U. Sae-Ueng, and S. Yodmuang, “Nanomechanical mapping of PLA hydroxyapatite composite scaffolds links surface homogeneity to stem cell differentiation,” Sci. Rep., vol. 14, no. 1, p. 21097, Sep. 2024. https://doi.org/10.1038/s41598-024-72073-z

[41] E. Odabaş, O. Öztürk, and E. Akarsu, “Modulation of mechanical and thermal properties of poly(lactic acid)/hydroxyapatite composites by interface crosslinking,” Polym. Compos., vol. 45, no. 18, pp. 17280–17293, Dec. 2024.

https://doi.org/10.1002/pc.28968

[42] L. Bauer, A. Rogina, M. Ivanković, and H. Ivanković, “Medical-grade poly(lactic acid)/hydroxyapatite composite films: Thermal and in vitro degradation properties,” Polymers, vol. 15, no. 6, p. 1512, Mar. 2023. https://doi.org/10.3390/polym15061512

[43] M. P. Bernardo, E. A. Gonçalves, S. Thein, G. Winter, S. Barcikowski, B. Tirosh, J. Groll, and R. L. Reis, “PLA/hydroxyapatite scaffolds exhibit in vitro immunological inertness and promote robust osteogenic differentiation of human mesenchymal stem cells without osteogenic stimuli,” Sci. Rep., vol. 12, no. 1, p. 2333, Feb. 2022. https://doi.org/10.1038/s41598-022-05207-w

[44] J. González-Benito, S. Zuñiga-Prado, J. Najera, and D. Olmos, “Non-woven fibrous polylactic acid/hydroxyapatite nanocomposites obtained via solution blow spinning: Morphology, thermal and mechanical behavior,” Nanomaterials, vol. 14, no. 2, p. 196, Jan. 2024. https://doi.org/10.3390/nano14020196

[45] M. Kasprzak, A. Szabłowska, K. Szaciłowski, K. Harańczyk, and K. P. Dudek, “Effects of sterilization and hydrolytic degradation on the structure, morphology and compressive strength of polylactide-hydroxyapatite composites,” Int. J. Mol. Sci., vol. 23, no. 18, p. 10454, Sep. 2022.

https://doi.org/10.3390/ijms231810454

[46] Y. Zhang, P. Kumar, S. Lv, W. Di, L. Wang, K. Ma, Y. Chen, and D. Zhang, “Recent advances in 3D bioprinting of vascularized tissues,” Mater. Des., vol. 199, art. no. 109398, 2021. https://doi.org/10.1016/j.matdes.2020.109398.

[47] L. Aliotta, V. Gigante, R. Geerinck, M.-B. Coltelli, and A. Lazzeri, “Micromechanical analysis and fracture mechanics of poly(lactic acid) (PLA)/polycaprolactone (PCL) binary blends,” Polym. Test., vol. 121, p. 107984, Apr. 2023. https://doi.org/10.1016/j.polymertesting.2023.107984

[48] K. I. Matumba, M. P. Motloung, V. Ojijo, S. S. Ray, and E. R. Sadiku, “Investigation of the effects of chain extender on material properties of PLA/PCL and PLA/PEG blends: Comparative study between polycaprolactone and polyethylene glycol,” Polymers, vol. 15, no. 9, p. 2230, May 2023. https://doi.org/10.3390/polym15092230

[49] H. Gao, J. Li, Z. Li, Y. Li, X. Wang, J. Jiang, and Q. Li, “Enhancing interfacial interaction of immiscible PCL/PLA blends by in-situ crosslinking to improve the foamability,” Polym. Test., vol. 124, p. 108063, Jul. 2023. https://doi.org/10.1016/j.polymertesting.2023.108063

[50] H. Li, R. Li, X. Zhang, and Q. Xing, “Sustainable polylactide/polycaprolactone-based polyurethane blends fabricated via reactive compatibilization,” Polym. Adv. Technol., vol. 35, no. 1, Jan. 2024. https://doi.org/10.1002/pat.6282

[51] R. Zafar, W. Lee, and S.-Y. Kwak, “A facile strategy for enhancing tensile toughness of poly(lactic acid) (PLA) by blending of a cellulose bio-toughener bearing a highly branched polycaprolactone,” Eur. Polym. J., vol. 175, p. 111376, Jul. 2022. https://doi.org/10.1016/j.eurpolymj.2022.111376

[52] L. G. Engler, M. Della Giustina, M. Giovanela, M. Roesch-Ely, N. Gately, and I. Major, “Exploring the synergy of metallic antimicrobial agents in ternary blends of PHB/PLA/PCL,” J. Biomed. Mater. Res. A, vol. 113, no. 1, Jan. 2025. https://doi.org/10.1002/jbm.a.37857

[53] A. Sadeghi, S. M. A. Razavi, and D. Shahrampour, “Fabrication and characterization of biodegradable active films with modified morphology based on polycaprolactone-polylactic acid-green tea extract,” Int. J. Biol. Macromol., vol. 205, pp. 341–356, Apr. 2022. https://doi.org/10.1016/j.ijbiomac.2022.02.070

[54] M. Eryildiz, A. Karakus, and M. Altan Eksi, “Development and characterization of PLA/PCL blend filaments and 3D printed scaffolds,” J. Mater. Eng. Perform., Oct. 2024. https://doi.org/10.1007/s11665-024-10247-6

[55] S. Pekdemir, E. Özen Öner, M. E. Pekdemir, S. Dalkılıç, and L. Kadıoğlu Dalkılıç, “An investigation into the influence of C. moschata leaves extract on physicochemical and biological properties of biodegradable PCL/PLA blend film,” J. Polym. Environ., vol. 30, no. 9, pp. 3645–3655, Sep. 2022. https://doi.org/10.1007/s10924-022-02460-y

[56] Z. Ding, N. Tang, J. Huang, X. Cao, and S. Wu, “Global hotspots and emerging trends in 3D bioprinting research,” Front. Bioeng. Biotechnol., vol. 11, p. 1169893, May 2023. https://doi.org/10.3389/fbioe.2023.1169893

[57] V. Pozzobon, F. Otaola, C. Arnoudts, and J. Lagirarde, “Impact of 3D printing materials on microalga Chlorella vulgaris,” Bioresour. Technol., vol. 389, p. 129807, Dec. 2023. https://doi.org/10.1016/j.biortech.2023.129807

[58] I. Buj-Corral, F. Matei-Ricart, Á. Domínguez-Fernández, H. M. A. Festa, A. A. Henao, E. Terés, M. Zivkovic, P. Milovanović, and T. Perić Kačarević, “Characterization of 3D printed metal-PLA composite scaffolds for biomedical applications,” Polymers, vol. 14, no. 13, p. 2754, Jul. 2022. https://doi.org/10.3390/polym14132754

[59] S. Pal, U. A. Gavhane, and A. S. K, “Biocompatible PVAc-g-PLLA acrylate polymers for DLP 3D printing with tunable mechanical properties,” ACS Appl. Mater. Interfaces, vol. 16, no. 45, pp. 62594–62605, Nov. 2024. https://doi.org/10.1021/acsami.4c11285

[60] S. Pant, S. Thomas, S. Loganathan, and R. B. Valapa, “3D bioprinted poly(lactic acid)/mesoporous bioactive glass-based biomimetic scaffold with rapid apatite crystallization and in-vitro cytocompatability for bone tissue engineering,” Int. J. Biol. Macromol., vol. 217, pp. 979–997, Sep. 2022. https://doi.org/10.1016/j.ijbiomac.2022.07.202

[61] S. J. Kim, G. Lee, and J.-K. Park, “Hybrid biofabrication of heterogeneous 3D constructs using low-viscosity bioinks,” ACS Appl. Mater. Interfaces, vol. 15, no. 35, pp. 41247–41257, Sep. 2023. https://doi.org/10.1021/acsami.3c05750

[62] U. Aizarna-Lopetegui, G. Groessbacher, A. Herrero-Ruiz, A. Tejo-Otero, M. Henriksen-Lacey, R. Levato, and D. Jimenez de Aberasturi, “Hybrid plasmonic bioresins and dECM-based materials for volumetric bioprinting of vascular-inspired architectures,” ACS Appl. Mater. Interfaces, vol. 17, no. 25, pp. 36982–36991, Jun. 2025. https://doi.org/10.1021/acsami.5c03880

[63] A. K. Trivedi, M. K. Gupta, and H. Singh, “PLA based biocomposites for sustainable products: A review,” Adv. Ind. Eng. Polym. Res., vol. 6, no. 4, pp. 382–395, Oct. 2023. https://doi.org/10.1016/j.aiepr.2023.02.002

[64] “Biocompatibility testing,” in Encyclopedia of Biomaterials and Biomedical Engineering, 2nd ed., G. E. Wnek and G. L. Bowlin, Eds. Boca Raton, FL, USA: CRC Press, 2008, pp. 169–178. https://doi.org/10.1201/9780429154065

[65] Z. U. Arif, M. Y. Khalid, R. Noroozi, A. Sadeghianmaryan, M. Jalalvand, and M. Hossain, “Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications,” Int. J. Biol. Macromol., vol. 218, pp. 930–968, Oct. 2022. https://doi.org/10.1016/j.ijbiomac.2022.07.140

[66] M. S. Raziyan, A. Palevicius, D. Perkowski, S. Urbaite, and G. Janusas, “Development and evaluation of 3D-printed PLA/PHA/PHB/HA composite scaffolds for enhanced tissue-engineering applications,” J. Compos. Sci., vol. 8, no. 6, p. 226, Jun. 2024. https://doi.org/10.3390/jcs8060226

[67] B. Cecen, “FDM-based 3D printing of PLA/PHA composite polymers,” Chem. Pap., vol. 77, no. 8, pp. 4379–4386, Aug. 2023. https://doi.org/10.1007/s11696-023-02786-4

[68] K. M. N’Gatta, N. Bridonneau, I. Cailleaux, I. Bihannic, E. Chevallier, M. Ben Yahia, V. Migonney, F. Leroux, and J. Mallet, “3D printing of cellulose nanocrystals based composites to build robust biomimetic scaffolds for bone tissue engineering,” Sci. Rep., vol. 12, no. 1, p. 21244, Dec. 2022. https://doi.org/10.1038/s41598-022-25652-x

[69] J. Crespo-Santiago, L. M. Delgado, R. Madariaga, L. Millan, O. Chico, P. Oliver, R. Pérez, and M. Otero-Viñas, “Oozing: An accessible technique to create 3D-printed scaffolds suitable for tissue engineering,” Int. J. Bioprint., early access, Mar. 2024. https://doi.org/10.36922/ijb.2337

[70] R. Ksouri, S. Odabas, and A. S. Yar Sağlam, “Exosome loaded 3D printed magnetic PLA constructs: A candidate for bone tissue engineering,” Prog. Addit. Manuf., vol. 10, no. 1, pp. 247–260, Jan. 2025. https://doi.org/10.1007/s40964-024-00619-8

[71] S. Wang, S. Zhao, J. Yu, Z. Gu, and Y. Zhang, “Advances in translational 3D printing for cartilage, bone, and osteochondral tissue engineering,” Small, vol. 18, no. 36, Sep. 2022.

https://doi.org/10.1002/smll.202201869

[72] S. I. Paipa-Jabre-Cantu, M. Rodriguez-Salvador, and P. F. Castillo-Valdez, “Revealing three-dimensional printing technology advances for oral drug delivery: Application to central-nervous-system-related diseases,” Pharmaceutics, vol. 17, no. 4, p. 445, Mar. 2025. https://doi.org/10.3390/pharmaceutics17040445

[73] A. L. V. Zumaya, A. Iemtsev, M. Fulem, and F. Hassouna, “Rational design of PLA-based ASDs for pharmaceutical 3D printing: Insights from phase diagram modeling,” Eur. J. Pharm. Biopharm., vol. 208, p. 114657, Mar. 2025. https://doi.org/10.1016/j.ejpb.2025.114657

[74] Y. Hu, Z. Luo, and Y. Bao, “Trends in photopolymerization 3D printing for advanced drug delivery applications,” Biomacromolecules, vol. 26, no. 1, pp. 85–117, Jan. 2025. https://doi.org/10.1021/acs.biomac.4c01004

[75] M. Kouassi, W. Jiang, X. Zhang, D. Jiao, H. Castel, and S. Dray, “FDM printing of microneedles based on biocompatible and biodegradable thermoplastic polymers,” J. Appl. Polym. Sci., vol. 141, no. 41, Nov. 2024. https://doi.org/10.1002/app.56067

[76] M. A. A. Majrashi, K. M. Yahya, S. A. M. Youssef, A. S. A. Yagoub, A. Y. A. Zaini, W. H. Almalki, N. D. Alotaibi, and M. Y. Alfaifi, “Revolutionizing drug delivery: Exploring the impact of advanced 3D printing technologies on polymer-based systems,” J. Drug Deliv. Sci. Technol., vol. 98, p. 105839, Sep. 2024. https://doi.org/10.1016/j.jddst.2024.105839

[77] I. Bácskay, Z. Ujhelyi, P. Fehér, and P. Arany, “The evolution of the 3D-printed drug delivery systems: A review,” Pharmaceutics, vol. 14, no. 7, p. 1312, Jun. 2022. https://doi.org/10.3390/pharmaceutics14071312

[78] H. Peng, N. Li, S. Miao, Y. Tang, and Y. Xie, “3D printing processes in precise drug delivery for personalized medicine,” Biofabrication, vol. 16, no. 3, p. 032001, Jul. 2024. https://doi.org/10.1088/1758-5090/ad3a14

[79] A. Korelidou, J. Domínguez-Robles, E. R. Magill, M. Eleftheriadou, V. A. Cornelius, R. F. Donnelly, A. Margariti, and E. Larrañeta, “3D-printed reservoir-type implants containing poly(lactic acid)/poly(caprolactone) porous membranes for sustained drug delivery,” Biomater. Adv., vol. 139, p. 213024, Aug. 2022. https://doi.org/10.1016/j.bioadv.2022.213024

[80] M. Brzeziński, B. N. V. Hari, T. Makowski, P. Sowiński, A. Domańska, and W. Gonciarz, “3D printing of dolutegravir-loaded polylactide filaments as a long-acting implantable system for HIV treatment,” Int. J. Biol. Macromol., vol. 258, pt. 1, p. 128754, Feb. 2024. https://doi.org/10.1016/j.ijbiomac.2023.128754

[81] M. Asadi, Z. Salehi, M. Akrami, M. Hosseinpour, S. Jockenhövel, and S. Ghazanfari, “3D printed pH-responsive tablets containing N-acetylglucosamine-loaded methylcellulose hydrogel for colon drug delivery applications,” Int. J. Pharm., vol. 645, p. 123366, Oct. 2023. https://doi.org/10.1016/j.ijpharm.2023.123366

[82] S. M. Werz, S. J. Zeichner, B.-I. Berg, H.-F. Zeilhofer, and F. Thieringer, “3D-printed surgical simulation models as educational tools for maxillofacial surgeons,” Eur. J. Dent. Educ., vol. 22, no. 3, pp. 160–168, Aug. 2018. https://doi.org/10.1111/eje.12332

[83] A. Zoabi, E. Nakar, S. Brown, L. Goldstein, G. Naveh, M. Ghelman, Z. Gil, and A. Buchbinder, “3D printing and virtual surgical planning in oral and maxillofacial surgery,” J. Clin. Med., vol. 11, no. 9, p. 2385, Apr. 2022. https://doi.org/10.3390/jcm11092385

[84] A. Gomez De Cadiz, A. Morales-Casas, C. M. A. Ramón, I. Espíritu-García-Molina, and C. Herrera-Ligero, “Connecting image and reality: The role of 3D printing in surgical planning,” in Advances in Human Factors and Ergonomics 2025 (AHFE 2025), 2025. https://doi.org/10.54941/ahfe1005938

[85] D. Ostaș, O. Almășan, L. Faur, A. Juncar, A. Lazea, R. Dudea, D. Pacurar, and G. Marc, “Point-of-care virtual surgical planning and 3D printing in oral and cranio-maxillofacial surgery: A narrative review,” J. Clin. Med., vol. 11, no. 22, p. 6625, Nov. 2022. https://doi.org/10.3390/jcm11226625

[86] E. Thomazi, C. Roman, T. O. Gamba, C. A. Perottoni, and J. E. Zorzi, “PLA-based ceramic composites for 3D printing of anthropomorphic simulators,” Int. J. Adv. Manuf. Technol., vol. 128, no. 11–12, pp. 5289–5300, Oct. 2023. https://doi.org/10.1007/s00170-023-12206-2

[87] A. Catasta, C. Martini, G. Alì, V. Gasbarro, G. M. Piacenti, T. L. Forbes, G. Melissano, A. Saratzis, and S. Caffarelli, “Systematic review on the use of 3D-printed models for planning, training and simulation in vascular surgery,” Diagnostics, vol. 14, no. 15, p. 1658, Jul. 2024. https://doi.org/10.3390/diagnostics14151658

[88] J. Meyer-Szary, M. Rahman, M. J. Tobota, J. Kwiatkowski, M. Pihowicz, K. Molasy, P. Weryński, K. I. Celińska, M. Klimczak, A. Loewe, T. J. Stefańczyk, D. Janczak, and M. Główczyńska, “The role of 3D printing in planning complex medical procedures and training of medical professionals—Cross-sectional multispecialty review,” Int. J. Environ. Res. Public Health, vol. 19, no. 6, p. 3331, Mar. 2022. https://doi.org/10.3390/ijerph19063331

[89] A. Valls-Esteve, A. González-García, R. San José-Estépar, J. M. Martí-Bonmatí, and L. Martí-Bonmatí, “Patient-specific 3D printed soft models for liver surgical planning and hands-on training,” Gels, vol. 9, no. 4, p. 339, Apr. 2023. https://doi.org/10.3390/gels9040339

[90] C. J. A. Mendonça, G. C. Guimarães, A. L. S. Pires, T. J. Macedo, T. F. A. Ribeiro, M. J. M. Marques, and L. M. C. F. R. da Cunha, “An overview of 3D anatomical model printing in orthopedic trauma surgery,” J. Multidiscip. Healthc., vol. 16, pp. 875–887, Apr. 2023. https://doi.org/10.2147/JMDH.S386406

[91] B. Hajnal, C. Csámer, B. Veres, B. Major, P. E. Eltes, T. Kassai, F. Bereczki, L. Klasszikus, G. Büki, and B. Szövérfi, “Clinical applications of 3D printing in spine surgery: A systematic review,” Eur. Spine J., vol. 34, no. 2, pp. 454–471, Feb. 2025. https://doi.org/10.1007/s00586-024-08594-y

[92] H. Lee, J. Kim, J. Oh, Y. Kim, S. Lee, and T. Kim, “Antibacterial PLA/Mg composite with enhanced mechanical and biological performance for biodegradable orthopedic implants,” Biomater. Adv., vol. 152, p. 213523, Sep. 2023. https://doi.org/10.1016/j.bioadv.2023.213523

[93] S. Pérez-Davila, L. González-Rodríguez, R. Lama, M. López-Álvarez, A. L. Oliveira, J. Serra, B. Novoa, A. Figueras, and P. González, “3D-printed PLA medical devices: Physicochemical changes and biological response after sterilisation treatments,” Polymers, vol. 14, no. 19, p. 4117, Oct. 2022. https://doi.org/10.3390/polym14194117

[94] R. G. Martin, C. Johansson, J. R. Tavares, and M. Dubé, “CF/PEEK skins assembly by induction welding for thermoplastic composite sandwich panels,” Compos. B Eng., vol. 284, p. 111676, Sep. 2024. https://doi.org/10.1016/j.compositesb.2024.111676

[95] Y. Liu, “Research progress and prospect of bio-ink application in 3D printing,” Highlights Sci. Eng. Technol., vol. 120, pp. 230–235, Dec. 2024.

https://doi.org/10.54097/ewwyr913

[96] T. Epari, P. K. Ray, J. Swaminathan, P. K. Roy, Y. N. Tiwari, S. C. Bose, and R. N. Ghosh, “Soft tissue reactions of different biodegradable polylactide implants,” Biomaterials, vol. 25, no. 2, pp. 259–267, 2004,

https://doi.org/10.1016/S0142-9612(03)00496-4