Preparation, Characterization, and Evaluation of Electrospun Copolymer Nanofiber Membranes for Kerosene Removal from Aqueous Solution
DOI:
https://doi.org/10.22153/kej.2026.12.010Keywords:
Polyacrylonitrile; Polysulfone; Copolymer; Electrospinning; Nanofiber membranes; Oily wastewaterAbstract
The petroleum sector generates significant amounts of oily wastewater requiring proper treatment before being released into the environment. The high stability, hydrophilicity, and large surface areas of membranes provide great opportunities for treating oily wastewater. For this work, electrospun nanofiber (ESNF) membranes of polyacrylonitrile (PAN) and polysulfone (PSU) were manufactured and evaluated for their separation capabilities. Multiple concentrations of the PAN and PSU polymers were used to optimize the copolymer nanofiber (NF) membranes. The water flux, oil rejection, and porosity evaluation of the membranes were compared. In addition, the surface and profile of the ESNF membranes were evaluated in terms of morphology and roughness, wettability, and tensile strength, and the results of scanning electron microscopy, atomic force microscopy, contact angle, and tensile tests were incorporated. The ESNF membranes provided positive results in the separation of oily wastewater. In particular, the best results were observed for the membranes composed of 75% PAN and 25% PSU, which reached 99.7% oil rejection, a maximum water flux of 400 L/m2.h, and 96% porosity, demonstrating great potential for wastewater treatment on an industrial scale. However, this study focused primarily on short-term performance evaluation. The long-term mechanical and chemical stability of ESNF membranes under continuous operational conditions remains to be examined.
Downloads
References
[1] L. H. Abdulraheem and W. Jameel, “Effects of magnetic treatment of different qualities of irrigation water on plant growth,” IOP Conf. Ser. Earth Environ. Sci., vol. 779, no. 1, p. 012030, Jun. 2021, doi: 10.1088/1755-1315/779/1/012030.
[2] N. U. Barambu, M. R. Bilad, M. A. Bustam, K. A. Kurnia, M. H. D. Othman, and N. A. H. M. Nordin, “Development of membrane material for oily wastewater treatment: A review,” Ain Shams Engineering Journal, vol. 12, no. 2, pp. 1361–1374, Jun. 2021, doi: 10.1016/j.asej.2020.08.027.
[3] L. H. Abdul-Raheem and M. S. Jaafer, “Improving the performance of the magnetic system by using vortex in groundwater treatment for irrigation purposes,” 2023, p. 020042. doi: 10.1063/5.0133964.
[4] K. A. Mter et al., “Modeling and evaluating mixing streams for an innovative design of a stationary elements’ mixer,” Advances in Science and Technology Research Journal, vol. 20, no. 2, pp. 197–211, Feb. 2026, doi: 10.12913/22998624/211872.
[5] L. H. Abdul-Raheem, M. Sh. Jaafar, A. C. Khraibet, and N. J. Imran, “Improving the removal efficiency of chemical oxygen demand and total organic carbon from industrial wastewater by magnetic forced vortex and ozone,” Desalination Water Treat., vol. 304, pp. 81–85, Aug. 2023, doi: 10.5004/dwt.2023.29805.
[6] Y. Liao, C.-H. Loh, M. Tian, R. Wang, and A. G. Fane, “Progress in electrospun polymeric nanofibrous membranes for water treatment: Fabrication, modification and applications,” Prog. Polym. Sci., vol. 77, pp. 69–94, Feb. 2018, doi: 10.1016/j.progpolymsci.2017.10.003.
[7] R. Su, S. Li, W. Wu, C. Song, G. Liu, and Y. Yu, “Recent progress in electrospun nanofibrous membranes for oil/water separation,” Sep. Purif. Technol., vol. 256, p. 117790, Feb. 2021, doi: 10.1016/j.seppur.2020.117790.
[8] L. Quoc Pham, M. V. Uspenskaya, R. O. Olekhnovich, and R. A. Olvera Bernal, “A Review on Electrospun PVC Nanofibers: Fabrication, Properties, and Application,” Fibers, vol. 9, no. 2, p. 12, Feb. 2021, doi: 10.3390/fib9020012.
[9] L. He, W. Lei, and D. Liu, “One-step facile fabrication of mechanical strong porous boron nitride nanosheets–polymer electrospun nanofibrous membranes for repeatable emulsified oil/water separation,” Sep. Purif. Technol., vol. 264, p. 118446, Jun. 2021, doi: 10.1016/j.seppur.2021.118446.
[10] H. Chen, M. Huang, Y. Liu, L. Meng, and M. Ma, “Functionalized electrospun nanofiber membranes for water treatment: A review,” Science of The Total Environment, vol. 739, p. 139944, Oct. 2020, doi: 10.1016/j.scitotenv.2020.139944.
[11] D. Wanke, A. da Silva, and C. Costa, “Modification of PVDF hydrophobic microfiltration membrane with a layer of electrospun fibers of PVP-co-PMMA: Increased fouling resistance,” Chemical Engineering Research and Design, vol. 171, pp. 268–276, Jul. 2021, doi: 10.1016/j.cherd.2021.05.004.
[12] R. Aflaha et al., “Tuning a Superhydrophobic Surface on an Electrospun Polyacrylonitrile Nanofiber Membrane by Polysulfone Blending,” ACS Omega, vol. 9, no. 27, pp. 29840–29847, Jul. 2024, doi: 10.1021/acsomega.4c03554.
[13] M. M. AL-Rajabi, I. W. Almanassra, A. K. A. Khalil, M. A. Atieh, T. Laoui, and K. A. Khalil, “Facile Coaxial Electrospinning Synthesis of Polyacrylonitrile/Cellulose Acetate Nanofiber Membrane for Oil–Water Separations,” Polymers (Basel)., vol. 15, no. 23, p. 4594, Nov. 2023, doi: 10.3390/polym15234594.
[14] T. Diwan, Z. N. Abudi, M. H. Al-Furaiji, and A. Nijmeijer, “A Competitive Study Using Electrospinning and Phase Inversion to Prepare Polymeric Membranes for Oil Removal,” Membranes (Basel)., vol. 13, no. 5, 2023, doi: 10.3390/membranes13050474.
[15] H. S. Al-Okaidy and B. I. Waisi, “The Effect of Electrospinning Parameters on Morphological and Mechanical Properties of PAN-based Nanofibers Membrane,” Baghdad Science Journal, Jan. 2023, doi: 10.21123/bsj.2023.7309.
[16] S. M. Alkarbouly and B. I. Waisi, “Fabrication of Electrospun Nanofibers Membrane for Emulsified Oil Removal from Oily Wastewater,” Baghdad Science Journal, vol. 19, no. 6, p. 1238, Dec. 2022, doi: 10.21123/bsj.2022.6421.
[17] C. N. Christou and T. Krasia-Christoforou, “Nanostructured electrospun fibers in environmental applications,” in Advances in Nanostructured Materials and Nanopatterning Technologies, Elsevier, 2020, pp. 203–241. doi: 10.1016/B978-0-12-816865-3.00008-1.
[18] S. T. Abdul-Hussein et al., “Systematic investigation of MAX phase (Ti3AlC2) modified polyethersulfone membrane performance for forward osmosis applications in desalination,” Arabian Journal of Chemistry, vol. 17, no. 1, p. 105475, Jan. 2024, doi: 10.1016/j.arabjc.2023.105475.
[19] D. Ponnamma et al., “Electrospun Polysulfone Hybrid Nanocomposite Fibers as Membrane for Separating Oil/Water Emulsion,” Water Conservation Science and Engineering, vol. 8, no. 1, p. 57, Dec. 2023, doi: 10.1007/s41101-023-00232-w.
[20] M. Hajikhani and M. Lin, “A review on designing nanofibers with high porous and rough surface via electrospinning technology for rapid detection of food quality and safety attributes,” Trends Food Sci. Technol., vol. 128, pp. 118–128, Oct. 2022, doi: 10.1016/j.tifs.2022.08.003.
[21] A. Almasian, Gh. Chizari Fard, M. Parvinzadeh Gashti, M. Mirjalili, and Z. Mokhtari Shourijeh, “Surface modification of electrospun PAN nanofibers by amine compounds for adsorption of anionic dyes,” Desalination Water Treat., vol. 57, no. 22, pp. 10333–10348, May 2016, doi: 10.1080/19443994.2015.1041161.
[22] M. Tian, Y. Liao, and R. Wang, “Engineering a superwetting thin film nanofibrous composite membrane with excellent antifouling and self-cleaning properties to separate surfactant-stabilized oil-in-water emulsions,” J. Memb. Sci., vol. 596, p. 117721, Feb. 2020, doi: 10.1016/j.memsci.2019.117721.
[23] Y. Liang, S. Kim, P. Kallem, and H. Choi, “Capillary effect in Janus electrospun nanofiber membrane for oil/water emulsion separation,” Chemosphere, vol. 221, pp. 479–485, Apr. 2019, doi: 10.1016/j.chemosphere.2019.01.048.
[24] A. N. Al-Naemi, M. A. Abdul-Majeed, M. H. Al-Furaiji, and I. Nghazi, “Fabrication and Characterization of Nanofibers Membranes using Electrospinning Technology for Oil Removal,” Baghdad Science Journal, vol. 18, no. 4, pp. 1338–1343, Dec. 2021, doi: 10.21123/bsj.2021.18.14.1338
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Al-Khwarizmi Engineering Journal
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright: Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
How to Cite
