How to Cite
Abstract
This article reviews the construction of organic solar cell (OSC) and characterized their optical and electrical properties, where indium tin oxide (ITO) used as a transparent electrode, “Poly (3-hexylthiophene- 2,5-diyl) P3HT / Poly (9,9-dioctylfluorene-alt-benzothiadiazole) F8BT” as an active layer and “Poly(3,4-ethylenedioxythiophene)-poly (styrene sulfonate)” PEDOT: PSS which is referred to the hole transport layer. Spin coating technique was used to prepared polymers thin film layers under ambient atmosphere to make OSC. The prepared samples were characterized after annealing process at (80 ͦ C) for (30 min) under non-isolated circumference. The results show a value of filling factor (FF) of (2.888), (0.233) and (0.28) and power conversion efficiency (PCE) of (0.0055), (3.333 10-6) and (0.0004), where these results were obtained by Keithley Electrometer Model 6517B, while spectral response is being utilized by LEOI-94 Monochromator and Keithley 6517B Electrometer.
References
Horigome, T., Kimura, K., Takakura, T., Nishino, T., & Fujii, I.; “Clean and Safe Energy Forever”, I ed., Vol. 1, International Solar Energy Society Proceedings Series, Newnes, 2012, p 20.
Zang, L.; “Energy Efficiency and Renewable Energy Through Nanotechnology”, Green Energy and Technology. London: Springer Science & Business Media. 2011, p 171.
Kim, M. S.; “Understanding Organic Photovoltaic Cells: Electrode, Nanostructure, Reliability, and Performance”, Dissertation on the degree "Doctor of Material Science and Engineering”, University of Michigan, (2009), pp8-25.
Renee Kroon, Martijn Lenes, Jan C. Hummelen, Paul W. M. Blom, And Bert De Boer; “Small Bandgap Polymers for Organic Solar Cells (Polymer Material Development in the Last 5 Years)”, University of Groningen, Groningen, the Netherlands, Taylor & Francis Group, 2008, pp 531- 540.
Łukasz Bernacki , Zbigniew Lisik , Beata Łuszczyńska, “The evaluation of organic solar cell’s properties based on polymer F8BT and fullerene derivative C60PCBM”, Przegląd Elektrotechniczny, R. 91 NR 9, 2015, p 13.
Seth Marder & Kwang-Sup Lee, Photoresponsive Polymers II, vol. 2014, Advances in Polymer Scienc, Springer, 2008, pp. 4-5.
Wallace C.H. Choy; “Organic Solar Cells: Materials and Device Physics, Department of Electrical and Electronic Engineering”, University of Hong Kong, China, Green Energy and Technology, Springer Science & Business Media, 2012, pp 160-161.
Barry P. Rand, Henning Richter; “Organic Solar Cells: Fundamentals, Devices, and Upscaling”, Taylor & Francis group, CRC Press, 2014, chapter -15, pp (713-725-727-730-221).
Rieger, R.; “Extended Donor and Acceptor Molecules for Organic Electronics”, Dissertation on the degree "Doctor of Science", The Department of Chemistry, pharmacy and Geosciences Johannes Gutenberg - university Mainz, 2009, p 11.
Barry C. Thompson, Jean M. J. Fréchet; “Polymer–Fullerene Composite Solar Cells”, Volume 47, Issue 1, Angewandte Chemie International Edition, 2007, p 60.
Qing Zhang, W. I. Milne; “Advances in Nanodevices and Nanofabrication: Selected Publications from Symposium of Nanodevices and Nanofabrication in ICMAT2011”, Taylor & Francis group, CRC Press, 2012, p 103.
Jha, A. R.; “Solar Cell Technology and Applications”, CRC Press, 2009 p 94.
Stuart R. Wenham, Martin A. Green, Muriel E. Watt, Richard Corkish, Alistair Sproul; “Applied Photovoltaics”, 3rd ed, Routledge, 2011, p 45.
Bo Wu, Nripan Mathews, Tze-Chien Sum; “Plasmonic Organic Solar Cells: Charge Generation and Recombination”, SpringerBriefs in Applied Sciences and Technology, Nanoscience and Nanotechnology, Springer, 2016, pp (7-39-40).
K.L. Chopra, S.R. Das ; “Thin Film Solar Cells”, 1st ed., Springer Science & Business Media, 1983, pp 130-131.
Ramchandra Pode, Boucar Diout; “Solar Lighting”, Springer Science & Business Media, 2011, p 32.
Ronald G. Driggers; “Encyclopedia of Optical Engineering: Pho-Z, Marcel Dekker”, Dekker Encyclopedias Series, vol.3, Encyclopedia of Optical Engineering, CRC Press, 2003, p 2200.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright (c) 2018 Al-Khwarizmi Engineering Journal