كيفية الاقتباس
الملخص
The present research investigates joints welding of 304L austenitic stainless steel using metal inert gas (MIG) welding method. The research explores the effect of process parameters (arc voltage, wire feed rate, and electrode wire diameter) on the mechanical properties of stainless steel. The above variables are varied respectively with 18.5, 19, 19.5 V, 116, 127, 137 mm/s, and 0.8, 1, 1.2 mm, with E308L as a filler electrode. The design matrix of the experiments was determined using the design of experiment (DOE) program Minitab 17 based on the levels of input elements used. The Taguchi orthogonal matrix methodology (Taguchi) technique was used to develop some empirical analysis for the maximum tensile strength and proper surface hardness as a function of the welding parameters mentioned above. The ( ) analysis was used to statistically verify the model's adequacy. The results show that the wire feed rate had the greatest effect on the tensile strength of the welded joints when choosing the medium level of arc voltage (19 V), while the arc voltage had a substantial influence on the micro-hardness of all welded joints. The weld-joint zone is given a higher micro-hardness value compared to the base metal zone.
المراجع
R.Molak and K. Paradowski, “Measurement of mechanical properties in a 316L stainless steel welded joint”, International Journal of Pressure Vessels and Piping, vol. 86,pp. 43–47, 2009.
A.S. Hameed,“Experimental investigation for multi characteristics optimization of MIG welding on 304 stainless steel using desirability function analysis”, JOURNAL OF MINES, METALS & FUELS. vol. 68, No.4, pp. 144 – 149, 2020.
Gulencand B.Develib,” Experimental study of the effect of hydrogen in argon as a shielding gas in MIG welding of austenitic stainless steel”. International Journal of Hydrogen Energy, vol. 30: pp. 1475 – 1481, 2005.
Salah S. Abed-Alkareem “Determination of Welding Velocity and Arc Energy for Fusion MAG Welding Joint” Al-Khwarizmi Eng. Journal, Vol. 10, No. 4, pp. 64 – 80 2014.
Abid Al-Sahib N.K., Adnan N. Abood and Amer A. Tuama “Welding of Low Alloy Steel DIN ISMO3 by MIG/MAG Spot “AL-Khwarizmi Eng. Journal, Vol.2, No. 2, pp. 1 – 19 2006.
Furusawa and K. Yasuda, “The Effect of Gas Metal Arc Welding (GMAW) processes on different welding parameters”. Procedia Engineering, vol. 41, pp 1502 – 1506, 2012.
L. S. Kumar S. M. Verma, and B. Suryanrayana, “Analysis of welding characteristics on stainless steel for the process of TIG and MIG with dye penetrate testinhg”. International Journal of Engineering and Innovative Technology, vol. 2, pp. 283 – 290, 2012.
V. Chauhan and R. S. Jadaun, “Parametric Optimization of MIG Welding for Stainless Steel (SS-304) and low carbon steel using Taguchi Design Method”, International Journal of Recent Scientific Research. vol. 6, pp. 2662 – 2666, 2015.
I. M. Omiogbemi and D. S. Yawas,” EFFECTS OF METAL INERT GAS WELDING PARAMETERS ON SOME MECHANICAL PROPERTIES OF AUSTENITIC STAINLESS STEEL IN ACIDIC ENVIRONMENT”, Nigerian Journal of Technology (NIJOTECH), vol. 36, No. 3, pp. 835 – 843, 2017.
S. A. Rizvi and W. Ali, “Optimization of Welding Parameters and Microstructure and Fracture Mode Characterization of GMA Welding by Using Taguchi Method on SS304H Austenitic Steel”, Mechanics and Mechanical Engineering, Technical University of Lodz, vol. 22, No.4, pp.1121-1131, 2018.
Er. Saurabh and V. S. Aher,” PARAMETRIC OPTIMIZATION OF MIG WELDING PROCESS TO IMPROVE ITS TENSILE STRENGTH”, International Journal of Research and Development, vol. 4, pp. 75 – 82, 2019.
A. Furqan and M. Amarnadha, “OPTIMIZATION OF MIG WELDING PARAMETERS FOR IMPROVING STRENGTH OF WELDED JOINT”, Journal of Interdisciplinary Cycle Research, vol. 6, pp 128 – 135, 2020.
ASTM, "Standard specification for heat-resisting chromium and chromium-nickel stainless steel plate, sheet, and Strip for Pressure Vessels", A240, 2006.
IEEE Criteria for Class IE Electric Systems, IEEE Standard 308, 1969.
American Society for Metal, “ASM Metal Handbook”, Vol.21 Copyright 2012.
E. Dean, R. Unal, “Taguchi Approach to Design Optimization for Quality and Cost: An Overview,” Int. Soc. Parametr. Anal., pp. 1–10, 1991.
O. Hinkelmann, “Design and Analysis of Experiments, Introduction to Experimental Design”. Canada: John Wiley & Sons, Inc., 2008.
Kumar A, Gautam SS, Kumar A. Heat input and joint efficiency of three welding processes TIG, MIG and FSW using AA6061. Int J Mech Eng Rob Res, vol. 1, p.p. 89–94 2014.
T. E. Abioye and O.O. Gbadeyan, "Analysis of the mechanical properties and penetration depth of gas metal arc welding on AISI 304 stainless steel," Int. J. Microstructure and Materials Properties, vol. 14, No. 1, 2019.
David, S.S. Babu, & J.M. Vitek, "Welding Solidification and Microstructure", Oak Ridge National Laboratory, Vol. 32, No. 3, 2003.
Herry and Oktadinata, "Microstructure and Hardness Profile of Dissimilar Lap Joint OF Type 304 Stainless Steel to SS400 Carbon Steel”, Kementerian Perindustrian Metal Indonesia, vol. 41 No. 2, pp. 47-54, 2019
حقوق الطبع والنشر: يحتفظ مؤلفو الوصول المفتوح بحقوق الطبع والنشر لاعمالهم، ويتم توزيع جميع مقالات الوصول المفتوح بموجب شروط ترخيص Creative Commons Attribution License، والتي تسمح بالاستخدام غير المقيد والتوزيع والاستنساخ في أي وسيط، بشرط ذكر العمل الأصلي بشكل صحيح. إن استخدام الأسماء الوصفیة العامة، والأسماء التجاریة، والعلامات التجاریة، وما إلی ذلك في ھذا المنشور، حتی وإن لم یتم تحدیدھ بشکل محدد، لا یعني أن ھذه الأسماء غیر محمیة بموجب القوانین واللوائح ذات الصلة. في حين يعتقد أن المشورة والمعلومات في هذه المجلة صحيحة ودقيقة في تاريخ صحتها، لا يمكن للمؤلفين والمحررين ولا الناشر قبول أي مسؤولية قانونية عن أي أخطاء أو سهو قد يتم. لا يقدم الناشر أي ضمان، صريح أو ضمني، فيما يتعلق بالمواد الواردة في هذه الوثيقة.