Abstract
This study was carried out to obtain the optimum conditions necessary for the process of soya protein hydrolysis by using hydrochloric acid (as a chemical catalyst) instead of the papain enzyme (as a biological catalyst), for the production of soya peptone. These conditions are implemented to test the effect of the variables of the process of hydrolysis on the nature and quality of the product.
The production of soya peptone was studied for their importance in the process of preparing and producing the culture media used in medical and microbiological laboratories.
The process of production of soya peptone includes four main stages:
- Preparing the defatted soya flour, firstly.
- The soya protein hydrolysis, secondly.
- Purifying the product, thirdly , and then,
- Drying the product, finally.
By following the procedure of the present study, the optimum conditions for the process of soya proteins hydrolysis have been reached in present study are:
- Optimum concentration for the hydrochloric acid solution is 1N.
- Optimum hydrolysis process temperature ranged between 50-53°
- Optimum period of hydrolysis time ranged between 17.189-19.97 hr.
The productivity of soya peptone was 38.071%, by following the procedure and the optimum production conditions of the present study.
References
[2] “Difco Manual of Dehydrated Culture Media and Reagents for Microbiological and Clinical Laboratory Procedures”, 9th ed., Detroit 1, Michigan, U.S.A., (1964).
[3] Bridson, E.Y., “The Oxoid Manual”, 7th ed., United Kingdom,(1995).
[4] Brewster, R. Q., and W. E. Mcewen, “Organic Chemistry”, 3rd ed., (1958).
[5] Weininger, S. J., Stermitz, “Organic Chemistry”, International Edition, (1984).
[6] Friedman, M., and R. Liardon, J. Agric. Food Chem., 33, 666, (1985).
[7] Haurowitz, F., “Biochemistry”, An Introductory Textbook, John Wiley & Sons, Inc., New York, (1955).
[8] Hendrickson, J. B., D. J. Cram, and G. S. Hammond, “Organic Chemistry”, 3rd ed., International Student Edition, McGraw-Hill Kogakusha, Ltd., (1970).
[9] “BDH Chemicals Ltd”, laboratory chemicals & biochemicals, Manual, England, (1984/1985).
[10] “Sigma Chemical Company”, Manual, U.S.A, (1988).
[11] “The United States Pharmacopoeia (USP XX II)”, January (1990).
[12] Hossain, N, Report, Ibn Al-Beitar Center (Ministry of Industrial and Minerals-Iraq), (1993).
[13] AL-Bahri, M. B. A. G, “Preparation of Soya Peptone and Potato Extract for Use in Production of Some Culture Media for Medical Laboratories”, M.Sc. Thesis, University of Technology , (2001).
[14] Cochran, W. G., and G. M. Cox, “Experimental Design”, John Wiley and Sons, Inc., New York, (1957).
[15] Montgomery, D. C., “Design and Analysis of Experiments”, John Wily and Sons, New York, (1976).
[16] Perry’s, R. H., and C. H. Chilton, “Chemical Engineers Handbook”, McGraw-Hill, 5th ed., (1973).
[17] Whitaler, J. R., and P. E. Granum, Anal. Biochem., 109, 156, (1980).
[18] Apostolatos, G., J. Fd. Technol., 19, 639, (1984).
[19] “AOAC-Official Methods of Analysis”, 12th ed., Association of Official Agricultural Chemists, Washington D. C. (1975).
[20] Lees, R., “Food Analysis: Analytical and Quality Control Methods for the Food Manufacturer, and Buyer”, 3rd ed.,Leonard Hill Book, (1975).
Copyright: Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.